Omron, UM, MC3 Series

The UM system takes the site into consideration

Connectors make wiring simple

Cables with connectors make wiring easy, even when multiple mats are used.

Wiring for two Safety Mats

Wiring for six Safety Mats

Trim that takes wiring and maintenance into consideration

The snap-type trim ensures proper cable installation and simplifies the maintenance and installation of mats.

Broad product selection ensures compatibility with a wide variety of sites

A variety of mat sizes are available. You can select mats that suit the protected area.

* Mats sized in inches are also available for use in North America. Contact your dealer for more information about the models and delivery periods.

Complies with international safety standards

The safety mat has received EN1760-1:1998 safety standard certification and complies with ANSI/RIA15.06-1999 and other standards. Meets PLd/Safety Category 3 (EN ISO13849-1: 2008) requirements when used in combination with the safety controller G9SP or the safety mat controller MC3.

last update: February 01, 2017

Ratings

Safety Mat Controller

Power input

Model	MC3
Power voltage	24 VDC
Operating voltage range	-15% to +15% of rated supply voltage
Power consumption *	3 W max.

* Power consumption of loads is not included.

Switch

Model	MC3
Rated load	6 A at 230 VAC/6 A at 24 VDC (resistive load) 5 A at 230 VAC (AC15)/2 A at 24 VDC (DC13) (inductive load)
Maximum rated voltage	250 VAC/24 VDC
Rated carry current	6 A
Maximum switching capacity	1,500 VA

Characteristics

Safety Mat

Model	UM
Detection method	Pressure sensing method
Actuating force	300 N min.
Maximum allowable load	2,000 N (EN1760-1 requirement)
Mechanical durability	1 million cycles min.
Material	PVC (Polyvinyl Chloride)
Ambient operating temperature	-37 to 66°C (with no icing or condensation)
Degree of protection	IP67
Weight	Approx. 24.4 kg/m²

Safety Mat Controller

Model		MC3
Response time		30 ms max.
Safety input		Four-wire Safety Mat only Mat can be connected in series (Connectable number: 12 max.) The external impedance must be 8 Ω or less between M11 and M21 and between M12 and M22.
Safety output		SPDT-NO
Auxiliary output		SPDT-NC
Insulation resistance		20 MΩ min. (at 500 VDC)
Dielectric strength	Between different poles of outputs	1,800 VAC, 50/60 Hz for 1 sec.
Dielectric strength	Between power supply and output	1,800 VAC, 50/60 Hz for 1 sec.
Vibration resistance		Malfunction: 10 to 55 Hz, 0.15 mm single amplitude
Mechanical shock resistance		Malfunction: 98 m/s²
Durability	Mechanical	10,000,000 cycles min.
Durability	Electrical	100,000 cycles min. (rated load, switching frequency: 360 cycles/hour)
Ambient operating temperature		0 to 55°C (with no icing or condensation)
Ambient operating humidity		0% to 90% RH
Degree of protection		IP20
Terminal tightening torque		0.5 Nm
Weight		Approx. 360 g

last update: February 01, 2017

Safety Mat Controller
MC3

Trims

Ramp Trim with Yellow PVC Cover
UMRT[]

Joining Trim
UMJS[]

Aluminum Ramp Trim
UMAL

Molded Outside Corner
UMOC

Molded Inside Corner
UMIC

Safety Mat

Accessories

Distribution Box
UMDB-6

Y Connector
UM-Y-2-1

Panel-mount Connector
UMPMC

Extension Cable
UMEC-03, UMEC-05
UMEC-10, UMEC-15

Connector with Cable Socket on One Cable End
XS2F-D421-C80-F
XS2F-D421-D80-F
XS2F-D421-G80-F
XS2F-D421-J80-F

TITLE	DOCUMENT TYPE	SIZE
UM-MC3	Catalog	4775 KB

The UM system takes the site into consideration

Connectors make wiring simple

Wiring for two Safety Mats

Wiring for six Safety Mats

Trim that takes wiring and maintenance into consideration

Broad product selection ensures compatibility with a wide variety of sites

Complies with international safety standards

Ratings

Safety Mat Controller

Power input

Switch

Characteristics

Safety Mat

Safety Mat Controller

Safety Mat Controller
MC3

Trims

Ramp Trim with Yellow PVC Cover
UMRT[]

Joining Trim
UMJS[]

Aluminum Ramp Trim
UMAL

Molded Outside Corner
UMOC

Molded Inside Corner
UMIC

Safety Mat

Accessories

Distribution Box
UMDB-6

Y Connector
UM-Y-2-1

Panel-mount Connector
UMPMC

Extension Cable
UMEC-03, UMEC-05
UMEC-10, UMEC-15

Connector with Cable Socket on One Cable End
XS2F-D421-C80-F
XS2F-D421-D80-F
XS2F-D421-G80-F
XS2F-D421-J80-F

Group Sites

Our Partner Sites

Subscribe Our Newsletter

The UM system takes the site into consideration

Connectors make wiring simple

Wiring for two Safety Mats

Wiring for six Safety Mats

Trim that takes wiring and maintenance into consideration

Broad product selection ensures compatibility with a wide variety of sites

Complies with international safety standards

Ratings

Safety Mat Controller

Power input

Switch

Characteristics

Safety Mat

Safety Mat Controller

Safety Mat Controller MC3

Trims

Ramp Trim with Yellow PVC Cover UMRT[]

Joining Trim UMJS[]

Aluminum Ramp Trim UMAL

Molded Outside Corner UMOC

Molded Inside Corner UMIC

Safety Mat

Accessories

Distribution Box UMDB-6

Y Connector UM-Y-2-1

Panel-mount Connector UMPMC

Extension Cable UMEC-03, UMEC-05 UMEC-10, UMEC-15

Connector with Cable Socket on One Cable End XS2F-D421-C80-F XS2F-D421-D80-F XS2F-D421-G80-F XS2F-D421-J80-F

Safety Mat Controller
MC3

Ramp Trim with Yellow PVC Cover
UMRT[]

Joining Trim
UMJS[]

Aluminum Ramp Trim
UMAL

Molded Outside Corner
UMOC

Molded Inside Corner
UMIC

Distribution Box
UMDB-6

Y Connector
UM-Y-2-1

Panel-mount Connector
UMPMC

Extension Cable
UMEC-03, UMEC-05
UMEC-10, UMEC-15

Connector with Cable Socket on One Cable End
XS2F-D421-C80-F
XS2F-D421-D80-F
XS2F-D421-G80-F
XS2F-D421-J80-F