A Category 3 PLd Safety System can be built by using Category 4 PLe compliant controllers together with our sensors
*1 Safety-related parts of control systems, Part 1: General principles for design
*2 Conformed from December 2021 production.
[Precautions when using as Category 3 PLd] |
[Required conditions]
1. | The source of hazards is located inside the machine and may cause hazards to nearby people. |
---|---|
2. | The equipment is classified as Category 3 PLd or lower. |
3. | The source of hazards is isolated only by the automatic door. |
* The product can be used safely when all of the above conditions 1 through 3 are satisfied!
* There are cases where you can use it under other conditions.
* | Be sure to read the "Cautions For Use" when using for safety applications. |
---|
With about half the light diffusion of previous models, narrow-beam models can be placed twice as closely together-without the added cost of purchasing and installing slits. |
With about half the light diffusion of previous models, narrow-beam models can detect minute objects with a diameter of just 0.5 mm <span class="inch">0.020 in</span>, without slits. |
Narrow-beam models deliver long-range sensing at 1 m 3.281ft.
Application Example:Detecting PCB rack
Sensor
Sensor
TITLE | DOCUMENT TYPE | SIZE |
EX-10 Ver.2 | Catalog | 2219 KB |
---|---|---|
Notice of compliance with safety standards Applicable models : EX-10 series Ver. 2 and PM-25/45 series | Catalog | 472 KB |
EX-10 SERIES | Manual | 942 KB |