Due to the customized IC and optical design, high precision detection is fulfilled with directivity and visibility achievable only by laser. The laser adopted is Class 1 (IEC / JIS / FDA / GB) laser that is safe to use, so that there is no need to separate the areas of sensor usage.

Light aberrations are reduced and a high definition laser spot is possible by incorporating a molded aspheric glass lens.

Errant beams are eliminated by the ø0.5 mm ø0.020 in receiver aperture. Only beams entering the aperture are used, making for high-precision sensing.

Due to convergent distance sensing, the background has very little effect, enabling stable sensing. Sensitivity adjuster allows you to adjust sensitivity to avoid sensing background objects when the distance between the workpiece and background objects is small.

EX-L200 series has the same mounting pitch as ultra-compact photoelectric sensor EX-20 series so that the time taken in designing is saved.

The sensor can be used even in environment where water or dust present because of its protection structure IP67.

A sensitivity adjuster of small size is incorporated to offer strong performance in minute detection or high precision detection.

The lead wire conductor’s thickness is increased to 0.15 mm2 from 0.1 mm2 of the conventional ultra-compact photoelectric sensor. This makes it easier to perform crimpling work on the cables for better workability. In addition, the tensile strength of the crimpling area has become stronger.