Omron, D6FZ-FGS Series

last update: December 03, 2014

Multi-sensing

Simultaneous Measurement of Flow, Pressure, Leakage, and Temperature

The Sensor provides multiple sensing functions.
You can identify compressed air conditions with just one Sensor.

Simple Setup

Mountable to Curved Pipes or Couplers [Silencer]

The built-in silencer eliminates ultrasonic noise and turbulence. It eliminates the need for straight pipes to make installation work easy.

High Accuracy

Highly Accurate Flow Measurements

High measuring accuracy of ±2% R.S. (at 50 L/min or less) is achieved.

Flow Measurements over a Wide Range

A wide measurement range of 1 to 1,000 L/min is achieved.

Resists Oils and Mist [Ultrasonic sensor]

A built-in ultrasonic sensor is used for flow measurements.
With high resistance to rusty pipes and oil flooded compressors, you can install the Sensor almost anywhere.

Main Features

Two analog outputs
Two pulse outputs
RS-485 communications
IP64
Operation indicator
Threshold values (peak, bottom, and leak)
Alarm hold

Feature Comparison

last update: December 03, 2014

last update: December 01, 2016

Ratings

Air Flow Sensor

Model			D6FZ-FGS1000
Applicable fluid			Air or nitrogen (N₂)
Working pressure			0.99MPa max.
Meas- urement	*Flow 1**	Detection range	1 to 1,000 L/min (std)
		Resolution	0.1 L/min
		Accuracy	±2.0% of reading at 50 L/min (std) or higher *2
		Accuracy	±0.1% F.S. at less than 50 L/min *2
	Pressure	Detection range	0 to 0.99 MPa
	Pressure	Accuracy	2% F.S.
	Temper- ature	Detection range	-10 to 60°C
	Temper- ature	Accuracy	±1.5% (absolute temperature)
Resist- ance to envi- ronment	Operating temperature		-10 to 60°C (with no condensation or icing)
	Operating humidity		35% to 85% RH (with no condensation or icing)
	Vibration resistance (destruction)		10 to 55 Hz with a 0.7-mm double amplitude or acceleration of 50 m/s² for 80 min each in X, Y, and Z directions
	Shock resistance (destruction)		150 m/s² 3 times each in six directions (up/down, left/right, forward/backward)
Pressure loss			Direct piping: 10 kPa max. (0.5 MPa, at maximum flow) Using Coupler (TL model from Nagahori Industry Co., Ltd.): 10 kPa max. (0.5 MPa, at maximum flow)
Power supply voltage			For one Sensor: 16 to 24 VDC ±10%, ripple (p-p): 10% max., For multiple Sensors: 24 VDC ±10%, ripple (p-p): 10% max. *3
Power consumption			2 W max.
Measurement cycle			Approx. 62.5 ms
Display	Display method		Status display with 2-color LED (lit or flashing)
Display	Displayed contents		Presence of power, air flow, and error alarm
Output	Output interface	Analog	Current output: 4 to 20 mA (2 outputs),*4 Maximum load resistance: 270 Ω
		ON/OFF	Open-drain output (2 outputs), *5 24 VDC 50 mA max. ON residual voltage: 1.5 V max., OFF leakage current: 50 μA max.
		RS-485	2-wire half-duplex communications with start-stop synchronization Baud rate: 115.2 kbps (fixed), Data bit length: 8 bits (fixed), Stop bit length: 1 bit (fixed), Parity: even (fixed), Communications protocol: Conforms to CompoWay/F.
	Outpus values		Momentary standard flow, total standard flow, pressure, and Sensor error output
Degree of protection			IP64 (Except when switch cover is removed.)
Wiring connection			M12 connector (8-pin)
Connection pipe diameter			Rc1 (25 A) (Bushing enables conversion to 15 A or 20 A.)
Material			Cable: PVC (polyvinylchloride); Main unit: Aluminum die-cast; Display: Acrylic
Dimensions			64 × 93 × 195 mm (W × D × H) (excluding flange)
Weight (in package)			Approx. 1.2 Kg (Approx. 1.7 Kg)
Accessories			Instruction Sheet

*1. Flow rates are converted to 1 atmospheric pressure (101.3 kPa) at 20°C.
*2. Does not include pressure and temperature accuracy. Conversion accuracy to the standard flow is ±2.5% of reading (at 20°C, 0.5 MPa).
*3. Always ground the 0 V terminal, and do not ground the 24 V (+) terminal. There is a risk of malfunction.
*4. The analog output is the momentary standard flow rate and pressure.
*5. The total standard flow for the pulse output can be set to 1, 10 (default), 100, or 1,000 L (std) per pulse.

Air Flow Station

Model	D6FZ-FGX21
Connectable Sensors	D6FZ-FGT200, D6FZ-FGT500, and D6FZ-FGS1000
Maximum number of connected Sensors	8 *1
Indications	7-segment 5-digit 2-row LCD, auxiliary information indicators
Recording interval	1 s, 2 s, 5 s, 10 s, 20 s, 30 s, or 1 min
Displayed data	Momentary flow rate, total flow rate, pressure, temperature, and billing amount/CO₂ conversion
Recorded data	Momentary flow rate, total flow rate, volume flow rate, pressure, and temperature
Calculation functions	Conversion of total flow rate to billing amount/CO₂
Recording modes	Continue Mode 2 and Ring Mode 3
External output	Alarm output (photocoupler output) *4
Communications interface	Ethernet (10Base-T or 100Base-TX)
Internal storage device	Internal memory: Approx. 4,200 data items when 1 Sensor is connected, Approx. 650 data items when 8 Sensors are connected.
External storage device	SD card (to save measured values and to save/read set values), Recommended SD card: HMC-SD291 (manufactured by OMRON) *5
Power supply voltage	DC input: 24 VDC ±10%, ripple (p-p): 10% max.
Current consumption	80 mA max.
Operating temperature	Without Ethernet: -10 to 40°C (with no condensation or icing), with Ethernet: 0 to 40°C (with no condensation or icing)
Operating humidity	35% to 85% RH (with no condensation or icing)
Storage humidity/ temperature	-15 to 60°C, 20% to 85% RH (with no condensation or icing)
Insulation resistance	20 MΩ (at 500 VDC)
Withstand voltage	1,000 VAC, 50/60 Hz for 1 min
Vibration resistance (destruction)	10 to 150 Hz with a 0.7-mm double amplitude or acceleration of 50 m/s² for 80 min each in X, Y, and Z directions
Shock resistance (destruction)	150 m/s² 3 times each in six directions (up/down, left/right, forward/backward) *6
Material	ABS
Degree of protection	IP30
Mounting method	Magnet mounting, screw mounting, or hooks
Dimensions	117.2 × 24.6 × 56.8 mm (W×D×H) (excluding protruding parts)
Weight (in package)	Approx. 150 g (Approx. 500 g)
Accessories	Instruction Sheet, Startup Guide, Connection Cable, 7 Alarm Output Connector 8

*1. Up to 8 Sensors can be connected when the recording cycle is 2 seconds or longer; up to 4 Sensors can be connected when the recording cycle is 1 second.
*2. Data is automatically written to the SD memory card when the internal memory reaches its capacity and recording continues until the SD memory card capacity is reached. Recording stops if there is no SD memory card inserted, when the internal memory capacity is reached, or when the SD memory card is write protected. (Recording can be resumed after inserting an SD memory card and outputting the data to it by pressing a button.) The default is Continue Mode. Use the PC Software to change the recording mode.
*3. Recording of the latest measured values continues until the internal memory reaches its capacity. (If the internal memory capacity is exceeded, data is overwritten from the oldest data in the memory.)
*4. An alarm is output when the upper or lower limit of the air flow that was set in threshold setting mode is exceeded.
*5. You can temporarily read and write data with an SD card that complies with SD/SDHC card standards and was made by another company, but the SD card may suddenly not be recognized, preventing you from accessing the data.
*6. When mounting the Sensor with magnets, be sure to install it in a location where it will not be subjected to shock.
*7. A T-branch connector to connect to D6FZ-FC02.
*8. OMRON's XW4B-02B1-H1 Connector.

last update: December 01, 2016

last update: December 03, 2014

(Unit: mm)

Unspecified dimensions tolerances: Tolerance class IT16

Air Flow Sensor

D6FZ-FGS1000

Air Flow Station

D6FZ-FGX21

Please click image to enlarge (open in a new window).

T-branch connector

D6FZ-FC02

Cables with Connector on One End

D6FZ-JD3A (L = 3 m)
D6FZ-JD10A (L = 10 m)
D6FZ-JD20A (L = 20 m)

Cables with Connectors on Both Ends

D6FZ-JD3B (L = 3 m)
D6FZ-JD5B (L = 5 m)
D6FZ-JD10B (L = 10 m)
D6FZ-JD20B (L = 20 m)

last update: December 03, 2014

TITLE	DOCUMENT TYPE	SIZE
D6FZ	Catalog	4826 KB
D6FZ	Catalog	7808 KB
D6FZ-FGS1000 Air Flow Sensor (ENG/JPN)	Manual	1249 KB
D6FZ-FGX21 Air Flow Station	Catalog	1057 KB
D6FZ-FGX21 Air Flow Station (Start-Up Guide)	Catalog	463 KB
D6FZ-FGX21, D6FZ-Series Air Flow Station, Air Flow Sensor User's	Catalog	4762 KB
EQUO Series Multi Data Viewer Light User's	Catalog	2846 KB
ZN9-EM[][]-S Mounting Magnet for ZN-[][]X (ENG/JPN)	Catalog	5048 KB

Multi-sensing

Simultaneous Measurement of Flow, Pressure, Leakage, and Temperature

Simple Setup

Mountable to Curved Pipes or Couplers [Silencer]

High Accuracy

Highly Accurate Flow Measurements

Flow Measurements over a Wide Range

Resists Oils and Mist [Ultrasonic sensor]

Main Features

Feature Comparison

Ratings

Air Flow Sensor

Air Flow Station

Air Flow Sensor

D6FZ-FGS1000

Air Flow Station

D6FZ-FGX21

T-branch connector

D6FZ-FC02

Cables with Connector on One End

Cables with Connectors on Both Ends

Group Sites

Our Partner Sites

Subscribe Our Newsletter