Omron, S8VS Series

Power ratings			15 W			30 W
Item Output voltage			5 V	12 V	24 V	5 V	12 V	24 V
Efficiency		With 100- VAC input	74% typical	79% typical	83% typical	74% typical	81% typical	85% typical
Efficiency		With 200- VAC input	73% typical	78% typical	80% typical	74% typical	80% typical	86% typical
Input	*Voltage 1**		100 to 240 VAC (allowable range: 85 to 264 VAC, 80 to 370 VDC *5)
	*Frequency 1**		50/60 Hz (47 to 450 Hz)
	Current	With 100- VAC input	0.45 A max., 0.34 A typical			0.9 A max., 0.66 A typical
	Current	With 200- VAC input	0.25 A max., 0.22 A typical			0.6 A max., 0.4 A typical
	Power factor		---
	Harmonic current regulation		Conforms to EN61000-3-2
	Leakage current	With 100- VAC input	0.5 mA max.
	Leakage current	With 200- VAC input	1.0 mA max.
	Inrush current *2	With 100- VAC input	17.5 A max., 14 A typical
	Inrush current *2	With 200- VAC input	35 A max., 28 A typical
Output	Voltage adjustment range *3		- 10% to 15% (with V.ADJ)
	Ripple noise voltage (at rated I/O)		60 mV max.	70 mV max.	60 mV max.	60 mV max.	90 mV max.	150 mV max.
	Input variation influence		0.5% max. (at 85- to 264-VAC input, 100% load)
	Load variation influence (rated input voltage)		2.0% max. (5 V), 1.5% max. (12 V, 24 V), (with rated input, 0 to 100% load)
	Temperature variation influence		0.05%/°C max.
	Startup time (at rated I/O) *2	With 100- VAC input	580 ms typical	530 ms typical	600 ms typical	500 ms typical	560 ms typical	560 ms typical
	Startup time (at rated I/O) *2	With 200- VAC input	340 ms typical	360 ms typical	400 ms typical	360 ms typical	380 ms typical	400 ms typical
	Output hold time (at rated I/O) *2	With 100- VAC input	39 ms typical	27 ms typical	28 ms typical	31 ms typical	22 ms typical	31 ms typical
	Output hold time (at rated I/O) *2	With 200- VAC input	187 ms typical	134 ms typical	134 ms typical	174 ms typical	123 ms typical	140 ms typical
Additional functions	*Overload protection 2**		The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC).
	Overvoltage protection *2		Yes *4
	Output voltage indication		No
	Output current indication		No
	Peak-hold current indication		No
	Maintenance forecast monitor indication		No
	Maintenance forecast monitor output		No
	Total run time monitor indication		No
	Total run time monitor output		No
	Undervoltage alarm indication		Yes (color: red)
	Undervoltage alarm output		No
	Parallel operation		No (However, backup operation is possible. An external diode is required.)
	Series operation		Models with 24-V output: Possible for up to 2 Power Supplies (with external diode) Models with 5- or 12-V output: Not possible
Other	Operating ambient temperature		Refer to the derating curve in Engineering Data. (with no icing or condensation)
	Storage temperature		- 25 to 65°C
	Operating ambient humidity		25% to 85% (Storage humidity: 25% to 90%)
	Dielectric strength		3.0 kVAC for 1 min. (between all inputs and outputs; detection current: 20 mA) 2.0 kVAC for 1 min. (between all inputs and PE terminals; detection current: 20 mA) 1.0 kVAC for 1 min. (between all outputs and PE terminals; detection current: 20 mA)
	Insulation resistance		100 MΩ min. (between all outputs and all inputs/PE terminals) at 500 VDC
	Vibration resistance		10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z directions
	Shock resistance		150 m/s² , 3 times each in ±X, ±Y, and ±Z directions
	Output indicator		Yes (color: green)
	EMI	Conducted Emissions	Conforms to EN55011 Group1 Class B and based on FCC Class A
	EMI	Radiated Emissions	Conforms to EN55011 Group1 Class B
	EMS		Conforms to EN61204-3 high severity levels
	Approved standards		UL Listed: UL508 (Listing, Class2 Output: Per 1310) UL UR: UL60950-1 (Recognition) cUL: CSA C22.2 No.107.1 (Class2 Output: Per CSA C22.2 No.223) cUR: CSA C22.2 No.60950-1 EN/VDE: EN50178 (=VDE0160), EN60950-1 (=VDE0805 Teil1)
	SEMI		F47-0706 (With 200-VAC input)
	Weight		160 g max.			180 g max.

*1. Do not use an inverter output for the Power Supply. Inverters with an output frequency of 50/60 Hz are available, but
the rise in the internal temperature of the Power Supply may result in ignition or burning.
*2. For a cold start at 25°C. Refer to Engineering Data on Data Sheet for details.
*3. If the output voltage adjuster (V. ADJ) is turned, the voltage will increase by more than +15% of the voltage
adjustment range. When adjusting the output voltage, confirm the actual output voltage from the Power Supply and be
sure that the load is not damaged.
*4. To reset the protection, turn OFF the input power for three minutes or longer and then turn it back ON.
*5. The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC).

Power ratings			60 W			90 W
Item Type			Standard	Mainte- nance forecast monitor	Total run time monitor	Standard	Mainte- nance forecast monitor	Total run time monitor
Efficiency		With 100- VAC input	84% typical	83% typical		83% typical	83% typical
Efficiency		With 200- VAC input	83% typical	85% typical		84% typical	85% typical
Input	*Voltage 1**		100 to 240 VAC (allowable range: 85 to 264 VAC or 80 to 370 VDC *11)
	*Frequency 1**		50/60 Hz (47 to 450 Hz)
	Current	With 100- VAC input	1.7 A max., 1.3 A typical	1.7 A max., 1.3 A typical		2.3 A max., 1.9 A typical	2.3 A max., 1.9 A typical
	Current	With 200- VAC input	1.0 A max., 0.68 A typical	1.0 A max., 0.78 A typical		1.4 A max., 1.0 A typical	1.4 A max., 1.2 A typical
	Power factor		---
	Harmonic current regulation		Conforms to EN61000-3-2
	Leakage current	With 100- VAC input	0.5 mA max.
	Leakage current	With 200- VAC input	1.0 mA max.
	Inrush current *2	With 100- VAC input	17.5 A max., 14 A typical
	Inrush current *2	With 200- VAC input	35 A max., 28 A typical
Output	Voltage adjustment range *3		- 10% to 15% (with V. ADJ) (The voltage cannot be adjusted for the S8VS- 09024[][][]S-[].)
	Ripple noise voltage (at rated I/O)		70 mV max.	90 mV max.		250 mV max.	150 mV max.
	Input variation influence		0.5% max. (at 85- to 264-VAC input, 100% load)
	Load variation influence (rated input voltage)		1.5% max. (with rated input, 0 to 100% load)
	Temperature variation influence		0.05%/°C max.
	Startup time (at rated I/O) *2	With 100- VAC input	620 ms typical	460 ms typical		460 ms typical	660 ms typical
	Startup time (at rated I/O) *2	With 200- VAC input	400 ms typical	290 ms typical		300 ms typical	420 ms typical
	Output hold time (at rated I/O) *2	With 100- VAC input	34 ms typical	33 ms typical		28 ms typical	28 ms typical
	Output hold time (at rated I/O) *2	With 200- VAC input	158 ms typical	154 ms typical		132 ms typical	136 ms typical
Addi- tional func- tions	*Overload protection 2**		105% to 160% of rated load current (101% to 110% of rated load current for the S8VS-09024[][][]S-[]), inverted L voltage drop, intermittent, automatic reset
	Overvoltage protection 2, 4		Yes
	Output voltage indication *5		No	Yes (selectable) *6		No	Yes (selectable) *6
	Output current indication *5		No	Yes (selectable) *7		No	Yes (selectable) *7
	Peak-hold current indication *5		No	Yes (selectable) *8		No	Yes (selectable) *8
	Maintenance forecast monitor indication *5		No	Yes (selectable)	No	No	Yes (selectable)	No
	Maintenance forecast monitor output		No				Yes (transistor output), 30 VDC max., 50 mA max. *9	No
	Total run time monitor indication *5		No		Yes (selectable)	No		Yes (selectable)
	Total run time monitor output *5		No					Yes (transistor output), 30 VDC max., 50 mA max. *9
	Undervoltage alarm indication *5		No	Yes (selectable)		No	Yes (selectable)
	Undervoltage alarm output terminals		No				Yes (transistor output), 30 VDC max., 50 mA max. *9
	Parallel operation		No (However, backup operation is possible. An external diode is required.)
	Series operation		Yes for up to 2 Power Supplies (with external diode)
Other	Operating ambient temperature		Refer to the derating curve in Engineering Data. (with no icing or condensation)
	Storage temperature		- 25 to 65°C
	Operating ambient humidity		25% to 85% (Storage humidity: 25% to 90%)
	Dielectric strength		3.0 kVAC for 1 min. (between all inputs and outputs/alarm outputs; detection current: 20 mA) 2.0 kVAC for 1 min. (between all inputs and PE terminals; detection current: 20 mA) 1.0 kVAC for 1 min. (between all outputs/alarm outputs and PE terminals; detection current for standard models: 30 mA, detection current for models with indication monitor: 20 mA) 500 VAC for 1 min. (between all outputs and alarm outputs; detection current: 20 mA)
	Insulation resistance		100 MΩ min. (between all outputs/alarm outputs and all inputs/PE terminals) at 500 VDC
	Vibration resistance		10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z directions 10 to 150 Hz, 0.35-mm single amplitude (5 G max.) for 80 min each in X, Y, and Z directions
	Shock resistance		150 m/s² , 3 times each in ±X, ±Y, and ±Z directions
	Output indicator		Yes (color: green)
	EMI	Conducted Emissions	Models with indication monitor: Conforms to EN55011 Group1 Class A and based on FCC Class A, Conforms to EN55011 Group1 Class B *11 Standard models: Conforms to EN61204-3 EN55011 Group 1 Class B and based on FCC Class A
	EMI	Radiated Emissions	Models with indication monitor: Conforms to EN55011 Group1 Class A, Conforms to EN55011 Group1 Class B *11 Standard models: Conforms to EN55011 Group1 Class B
	EMS		Conforms to EN61204-3 high severity levels
	Approved standards *11		UL: UL 508 (Listing; Class 2 Output: Per UL1310), UL UR: UL 60950-1 (Recognition), cUL: CSA C22.2 No.107.1 (Class 2 Output: Per CSA C22.2 No. 223), cUR: CSA C22.2 No.60950-1, EN/VDE: EN 50178 (= VDE 0160), EN 60950-1 (= VDE 0805 Teil 1) KOSHA S Mark *10			UL: UL 508 (Listing) UL Listed (S8VS-09024[][][]S-[] only.): UL 508 (Listing, Class 2 Output: Per UL1310), UL UR: UL 60950-1 (Recognition), cUL: CSA C22.2 No.107.1, cUL (S8VS-09024-[][][]S-[] only): CSA C22.2 No.107.1 (Class 2 Output: Per CSA C22.2 No. 223), cUR: CSA C22.2 No.60950-1, EN/VDE: EN 50178 (= VDE 0160), EN 60950-1 (= VDE 0805 Teil 1) KOSHA S Mark *10
	*SEMI 11**		F47-0706 (With 200-VAC input)
	Weight		330 g max.			490 g max.

*1. Do not use an inverter output for the Power Supply. Inverters with an output frequency of 50/60 Hz are available, but
the rise in the internal temperature of the Power Supply may result in ignition or burning.
*2. For a cold start at 25°C. Refer to Engineering Data on Data Sheet for details.
*3. If the output voltage adjuster (V. ADJ) is turned, the voltage will increase by more than +15% of the voltage
adjustment range (by more than +10% for 240-W models with indication monitor).
When adjusting the output voltage, confirm the actual output voltage from the Power Supply and be sure that the load
is not damaged.
*4. To reset the protection, turn OFF the input power for three minutes or longer and then turn it back ON.
*5. Displayed on 7-segment LED. (character height: 8 mm)
*6. Resolution of output voltage indication: 0.1 V, Precision of output voltage indication: ±2% (percentage of output
voltage value, ±1 digit)
*7. Resolution of output current indication: 0.1 A; Precision of output current indication: ±5% F.S. ±1 digit max. (specified
by rated output voltage)
*8. Resolution of peak-hold current indication: 0.1 A; Precision of peak-hold current indication: ±5% F.S. ±1 digit max.
(specified by rated output voltage);
Signal width required for peak-hold current: 20 ms
*9. A Type and B Type: Sinking, AP Type and BP Type: Sourcing, BE Type: No alarm output.
*10. S8VS-06024A, S8VS-09024A/AP, S8VS-12024A/AP, S8VS-18024A/AP, and S8VS-24024A/AP only
*11. The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC).

Power ratings			120 W			180 W
Item Type			Standard	Mainte- nance forecast monitor	Total run time monitor	Standard	Mainte- nance forecast monitor	Total run time monitor
Efficiency		With 100- VAC input	84% typical	83% typical		85% typical	85% typical
Efficiency		With 200- VAC input	87% typical	85% typical		88% typical	87% typical
Input	*Voltage 1**		100 to 240 VAC (allowable range: 85 to 264 VAC or 80 to 370 VDC *11)
	*Frequency 1**		50/60 Hz (47 to 63 Hz)
	Current	With 100- VAC input	1.9 A max., 1.5 A typical			2.9 A max., 2.2 A typical
	Current	With 200- VAC input	1.1 A max., 0.71 A typical	1.1 A max., 0.72 A typical		1.6 A max., 1.1 A typical
	Power factor		0.9 min.
	Harmonic current regulation		Conforms to EN61000-3-2
	Leakage current	With 100- VAC input	0.5 mA max.
	Leakage current	With 200- VAC input	1.0 mA max.
	Inrush current *2	With 100- VAC input	17.5 A max., 14 A typical
	Inrush current *2	With 200- VAC input	35 A max., 28 A typical
Output	Voltage adjustment range *3		- 10% to 15% (with V.ADJ)
	Ripple noise voltage (at rated I/O)		60 mV max.	130 mV max.		50 mV max.	180 mV max.
	Input variation influence		0.5% max. (at 85- to 264-VAC input, 100% load)
	Load variation influence (rated input voltage)		1.5% max. (with rated input, 0 to 100% load)
	Temperature variation influence		0.05%/°C max.
	Startup time (at rated I/O) *2	With 100- VAC input	550 ms typical	650 ms typical		570 ms typical	580 ms typical
	Startup time (at rated I/O) *2	With 200- VAC input	400 ms typical	520 ms typical		470 ms typical	490 ms typical
	Output hold time (at rated I/O) *2	With 100- VAC input	52 ms typical	56 ms typical		58 ms typical	70 ms typical
	Output hold time (at rated I/O) *2	With 200- VAC input	54 ms typical	56 ms typical		62 ms typical	70 ms typical
Addi- tional func- tions	Overload protection *2		105% to 160% of rated load current, inverted L voltage drop, automatic reset
	Overvoltage protection 2, 4		Yes
	Output voltage indication *5		No	Yes (selectable) *6		No	Yes (selectable) *6
	Output current indication *5		No	Yes (selectable) *7		No	Yes (selectable) *7
	Peak-hold current indication *5		No	Yes (selectable) *8		No	Yes (selectable) *8
	Maintenance forecast monitor indication *5		No	Yes (selectable)	No	No	Yes (selectable)	No
	Maintenance forecast monitor output		No	Yes (transistor output), 30 VDC max., 50 mA max. *9	No	No	Yes (transistor output), 30 VDC max., 50 mA max. *9	No
	Total run time monitor indication *5		No		Yes (selectable)	No		Yes (selectable)
	Total run time monitor output *5		No		Yes (transistor output), 30 VDC max., 50 mA max. *9	No		Yes (transistor output), 30 VDC max., 50 mA max. *9
	Undervoltage alarm indication *5		No	Yes (selectable)		No	Yes (selectable)
	Undervoltage alarm output terminals		No	Yes (transistor output), 30 VDC max., 50 mA max. *9		No	Yes (transistor output), 30 VDC max., 50 mA max. *9
	Parallel operation		No (However, backup operation is possible. An external diode is required.)
	Series operation		Yes for up to 2 Power Supplies (with external diode)
Other	Operating ambient temperature		Refer to the derating curve in Engineering Data. (with no icing or condensation)
	Storage temperature		- 25 to 65°C
	Operating ambient humidity		25% to 85% (Storage humidity: 25% to 90%)
	Dielectric strength		3.0 kVAC for 1 min. (between all inputs and outputs/alarm outputs; detection current: 20 mA) 2.0 kVAC for 1 min. (between all inputs and PE terminals; detection current: 20 mA) 1.0 kVAC for 1 min. (between all outputs/alarm outputs and PE terminals; detection current for standard models: 30 mA, detection current for models with indication monitor: 20 mA 500 VAC for 1 min. (between all outputs and alarm outputs; detection current: 20 mA)
	Insulation resistance		100 MΩ min. (between all outputs/alarm outputs and all inputs/PE terminals) at 500 VDC
	Vibration resistance		10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z directions 10 to 150 Hz, 0.35-mm single amplitude (5 G max.) for 80 min each in X, Y, and Z directions
	Shock resistance		150 m/s² , 3 times each in ±X, ±Y, and ±Z directions
	Output indicator		Yes (color: green)
	EMI	Conducted Emissions	Models with indication monitor: Conforms to EN55011 Group1 Class A and based on FCC Class A, Conforms to EN55011 Group1 Class B *11 Standard models: Conforms to EN55011 Group1 Class B and based on FCC Class A
	EMI	Radiated Emissions	Models with indication monitor: Conforms to EN55011 Group1 Class A, Conforms to EN55011 Group1 Class B *11 Standard models: Conforms to EN55011 Group1 Class B
	EMS		Conforms to EN61204-3 high severity levels
	Approved standards *11		UL Listed: UL 508 (Listing), UL UR: UL 60950-1 (Recognition), cUL: CSA C22.2 No. 107.1, cUR: CSA C22.2 No. 60950-1, EN/VDE: EN 50178 (= VDE 0160), EN 60950-1 (= VDE 0805 Teil 1) KOSHA S Mark *10
	*SEMI 11**		F47-0706 (200-VAC input)
	Weight		550 g max.			850 g max.

*1. Do not use an inverter output for the Power Supply. Inverters with an output frequency of 50/60 Hz are available, but
the rise in the internal temperature of the Power Supply may result in ignition or burning.
*2. For a cold start at 25°C. Refer to Engineering Data on Data Sheet for details.
*3. If the output voltage adjuster (V. ADJ) is turned, the voltage will increase by more than +15% of the voltage
adjustment range (by more than +10% for 240-W models with indication monitor).
When adjusting the output voltage, confirm the actual output voltage from the Power Supply and be sure that the load
is not damaged.
*4. To reset the protection, turn OFF the input power for three minutes or longer and then turn it back ON.
*5. Displayed on 7-segment LED. (character height: 8 mm)
*6. Resolution of output voltage indication: 0.1 V, Precision of output voltage indication: ±2% (percentage of output
voltage value, ±1 digit)
*7. Resolution of output current indication: 0.1 A; Precision of output current indication: ±5% F.S. ±1 digit max. (specified
by rated output voltage)
*8. Resolution of peak-hold current indication: 0.1 A; Precision of peak-hold current indication: ±5% F.S. ±1 digit max.
(specified by rated output voltage);
Signal width required for peak-hold current: 20 ms
*9. A Type and B Type: Sinking, AP Type and BP Type: Sourcing, BE Type: No alarm output.
*10. S8VS-06024A, S8VS-09024A/AP, S8VS-12024A/AP, S8VS-18024A/AP, and S8VS-24024A/AP only
*11. The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC).

Power ratings			240 W			480 W
Item Type			Standard	Mainte- nance forecast monitor	Total run time monitor	Standard	Mainte- nance forecast monitor	Total run time monitor
Efficiency		With 100- VAC input	85% typical			85% typical
Efficiency		With 200- VAC input	88% typical			89% typical
Input	*Voltage 1**		100 to 240 VAC (allowable range: 85 to 264 VAC or 80 to 370 VDC *11)			100 to 240 VAC (allowable range: 85 to 264 VAC)
	*Frequency 1**		50/60 Hz (47 to 63 Hz)
	Current	With 100- VAC input	3.8 A max., 2.9 A typical			7.4 A max., 5.8 A typical
	Current	With 200- VAC input	2.0 A max., 1.5 A typical			3.9 A max., 2.8 A typical
	Power factor		0.9 min.			0.95 min.
	Harmonic current regulation		Conforms to EN61000-3-2
	Leakage current	With 100- VAC input	0.5 mA max.
	Leakage current	With 200- VAC input	1.0 mA max.
	Inrush current *2	With 100- VAC input	17.5 A max., 14 A typical
	Inrush current *2	With 200- VAC input	35 A max., 28 A typical
Output	Voltage adjustment range *3		- 10% to 15% (with V.ADJ)			-10% to 15% (with V.ADJ)
	Ripple noise voltage (at rated I/O)		140 mV max.	160 mV max.		310 mV max.
	Input variation influence		0.5% max. (at 85- to 264-VAC input, 100% load)
	Load variation influence (rated input voltage)		1.5% max. (with rated input, 0 to 100% load)
	Temperature variation influence		0.05%/°C max.
	Startup time (at rated I/O) *2	With 100- VAC input	540 ms typical	510 ms typical		460 ms typical
	Startup time (at rated I/O) *2	With 200- VAC input	230 ms typical	510 ms typical		340 ms typical
	Output hold time (at rated I/O) *2	With 100- VAC input	64 ms typical	46 ms typical		37 ms typical
	Output hold time (at rated I/O) *2	With 200- VAC input	64 ms typical	46 ms typical		41 ms typical
Addi- tional func- tions	Overload protection *2		105% to 160% of rated load current, inverted L voltage drop, automatic reset
	Overvoltage protection 2, 4		Yes
	Output voltage indication *5		No	Yes (selectable) *6		No	Yes (selectable) *6
	Output current indication *5		No	Yes (selectable) *7		No	Yes (selectable) *7
	Peak-hold current indication *5		No	Yes (selectable) *8		No	Yes (selectable) *8
	Maintenance forecast monitor indication *5		No	Yes (selectable)	No		Yes (selectable)	No
	Maintenance forecast monitor output		No	Yes (transistor output), 30 VDC max., 50 mA max. *9	No		Yes (transistor output), 30 VDC max., 50 mA max.	No
	Total run time monitor indication *5		No		Yes (selectable)	No		Yes (selectable)
	Total run time monitor output *5		No		Yes (transistor output), 30 VDC max., 50 mA max. *9	No		Yes (transistor output), 30 VDC max., 50 mA max. *9
	Undervoltage alarm indication *5		No	Yes (selectable)		No	Yes (selectable)
	Undervoltage alarm output terminals		No	Yes (transistor output), 30 VDC max., 50 mA max. *9		No	Yes (transistor output), 30 VDC max., 50 mA max. *9
	Parallel operation		No (However, backup operation is possible. An external diode is required.)
	Series operation		Yes for up to 2 Power Supplies (with external diode)
Other	Operating ambient temperature		Refer to the derating curve in Engineering Data. (with no icing or condensation)
	Storage temperature		- 25 to 65°C
	Operating ambient humidity		25% to 85% (Storage humidity: 25% to 90%)
	Dielectric strength		3.0 kVAC for 1 min. (between all inputs and outputs/alarm outputs; detection current: 20 mA) 2.0 kVAC for 1 min. (between all inputs and PE terminals; detection current: 20 mA) 1.0 kVAC for 1 min. (between all outputs/alarm outputs and PE terminals; detection current for standard 240-W and 480-W models: 30 mA, detection current for 240-W models with indication monitor: 20 mA) 500 VAC for 1 min. (between all outputs and alarm outputs; detection current: 20 mA)
	Insulation resistance		100 MΩ min. (between all outputs/alarm outputs and all inputs/PE terminals) at 500 VDC
	Vibration resistance		10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z directions 10 to 150 Hz, 0.35-mm single amplitude (5 G max.) for 80 min each in X, Y, and Z directions: 240 W 10 to 150 Hz, 0.35-mm single amplitude (3 G max.) for 80 min each in X, Y, and Z directions: 480 W
	Shock resistance		150 m/s² , 3 times each in ±X, ±Y, and ±Z directions
	Output indicator		Yes (color: green)
	EMI	Conducted Emissions	Models with indication monitor: Conforms to EN55011 Group1 Class A and based on FCC Class A, Conforms to EN55011 Group1 Class B *11 Standard models: Conforms to EN55011 Group1 Class B and based on FCC Class A			Conforms to EN55011 Group1 Class A and based on FCC Class A Conforms to EN55011 Group1 Class B *11
	EMI	Radiated Emissions	Models with indication monitor: Conforms to EN55011 Group1 Class A, Conforms to EN55011 Group1 Class B *11 Standard models: Conforms to EN55011 Group1 Class B			Conforms to EN55011 Group1 Class A Conforms to EN55011 Group1 Class B *11
	EMS		Conforms to EN61204-3 high severity levels
	Approved standards *11		UL Listed: UL 508 (Listing), UL UR: UL 60950-1 (Recognition), cUL: CSA C22.2 No.107.1, cUR: CSA C22.2 No. 60950-1, EN/VDE: EN 50178 (=VDE 0160), EN 60950-1 (=VDE 0805 Teil 1) KOSHA S Mark *10
	*SEMI 11**		F47-0706 (200-VAC input)
	Weight		1,150 g max.			1,700 g max.

*1. Do not use an inverter output for the Power Supply. Inverters with an output frequency of 50/60 Hz are available, but
the rise in the internal temperature of the Power Supply may result in ignition or burning.
*2. For a cold start at 25°C. Refer to Engineering Data on Data Sheet for details.
*3. If the output voltage adjuster (V. ADJ) is turned, the voltage will increase by more than +15% of the voltage
adjustment range (by more than +10% for 240-W models with indication monitor).
When adjusting the output voltage, confirm the actual output voltage from the Power Supply and be sure that the load
is not damaged.
*4. To reset the protection, turn OFF the input power for three minutes or longer and then turn it back ON.
*5. Displayed on 7-segment LED. (character height: 8 mm)
*6. Resolution of output voltage indication: 0.1 V, Precision of output voltage indication: ±2% (percentage of output
voltage value, ±1 digit)
*7. Resolution of output current indication: 0.1 A; Precision of output current indication: ±5% F.S. ±1 digit max. (specified
by rated output voltage)
*8. Resolution of peak-hold current indication: 0.1 A; Precision of peak-hold current indication: ±5% F.S. ±1 digit max.
(specified by rated output voltage);
Signal width required for peak-hold current: 20 ms
*9. A Type and B Type: Sinking, AP Type and BP Type: Sourcing, BE Type: No alarm output.
*10. S8VS-06024A, S8VS-09024A/AP, S8VS-12024A/AP, S8VS-18024A/AP, and S8VS-24024A/AP only
*11. The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC).

TITLE	DOCUMENT TYPE	SIZE
S8VS	Catalog	4841 KB
S8VS (15, 30 W) Switching Power Supply (ENG/JPN/ITA/GER/FRE/SPA)	Instruction Manual	816 KB
S8VS(60,90,120,180,240W) Switching Power Supply (ENG/CHI)	Instruction Manual	2472 KB
S8VS(60,90,120,180,240W) Switching Power Supply (ENG/CHI)	Instruction Manual	995 KB
S8VS (480 W) Switching Power Supply (ENG/JPN/ITA/GER/FRE/SPA)	Instruction Manual	2195 KB
S8VS (Models with Indication Monitor) Switching Power Supply (ENG/JPN/ITA/GER/FRE/SPA)	Instruction Manual	818 KB
S8VS (Models with Indication Monitor) (480 W) Switching Power Supply (ENG/JPN/ITA/GER/FRE/SPA)	Instruction Manual	1030 KB
S8VS (Models with Indication Monitor) (60, 90, 120, 180, 240 W) Switching Power Supply (ENG/JPN/ITA/GER/FRE/CHI)	Instruction Manual	1114 KB

60/90/120/180/240/480-W Models

15/30-W Models

Features Common to All Models

Ratings/Characteristics

Power Supplies with Screw Terminal Blocks

Power Supplies with Screwless Terminal Blocks

DIN Rail (Order Separately)

Mounting Rail (Material: Aluminum)

Mounting Rail (Material: Aluminum)

End Plate

Mounting Brackets

Group Sites

Our Partner Sites

Subscribe Our Newsletter