NA5-[]W and NA5-[]U have the same specifications and performance characteristics of hardware and software.

Display

Item Specification
NA5-15W NA5-12W NA5-9W NA5-7W
Display panel
*1 		Display device TFT LCD
Screen size 15.4 inches 12.1 inches 9.0 inches 7.0 inches
Resolution 1,280 × 800 dots (horizontal ✕ vertical) 800 × 480 dots (horizontal ✕ vertical)
Colors 16,770,000 colors (24 bit full colors)
Effective display
area 		331 × 207 mm
(horizontal ✕
vertical) 		261 × 163 mm
(horizontal ✕
vertical) 		197 × 118 mm
(horizontal ✕
vertical) 		152 × 91 mm
(horizontal ✕
vertical)
View angles Left: 60°, Right: 60°, Top: 60°, Bottom: 60°
Backlight *2 Life 50,000 hours min. *3
Brightness
adjustment 		200 levels
Front panel
indicators *4 		RUN Light green: Normal operation Light red: Error

1. There may be some defective pixels in the display. This is not a fault as long as the numbers of defective light and
dark pixels fall within the following standard ranges.

Model Standard range
NA5-15W[][][][]
NA5-12W[][][][]
NA5-9W[][][][]
NA5-7W[][][][] 		Number of light and dark pixels: 10 or less. (There must not be 3 consecutive light/dark pixels.)

2. The backlight can be replaced at an OMRON maintenance base.
3. This is the estimated time before brightness is reduced by half at room temperature and humidity. The life expectancy
is drastically shortened if Programmable Terminal is used at high temperatures.
4. The brightness of the front panel indicators is also adjustable when you adjust the brightness of the backlight.

Operation

Item Specification
NA5-15W NA5-12W NA5-9W NA5-7W
Touch panel Method: Analog resistive membrane type
Resolution: 16,384 ✕ 16,384
Life: 1,000,000 operations
Function keys * 3 inputs (capacitance inputs)

* Each function key has blue indicator. The brightness of the function key indicators is also adjustable when you adjust
the brightness of the backlight.

Data Capacity

Item Specification
NA5-15W NA5-12W NA5-9W NA5-7W
User data capacity 256 MB

External Interfaces

Item Specifications (Same for all models.)
Ethernet
ports 		Applications Port 1: Connecting to anything other than the Sysmac Studio, e.g., device
connections and VNC clients
Port 2: Connecting to the Sysmac Studio in addition to the applications of port 1.
Number of ports 2 ports
Compliant standards IEEE 802.3i (10BASE-T), IEEE 802.3u (100BASE-TX), and IEEE 802.3ab
(1000Base-T)
Transmission media Shielded twisted-pair (STP) cable: Category 5, 5e, or higher
Transmission distance 100 m
Connector RJ-45 8P8C modular connector
USB host
ports 		Applications USB Memory Device, keyboard, or mouse
Number of ports 2 ports
Compliant standards USB 2.0
Transmission distance 5 m max.
Connector Type-A connector
USB slave
port 		Applications Sysmac Studio connection
Number of ports 1 port
Compliant standards USB 2.0
Transmission distance 5 m max.
Connector Type-B connector
Serial port
* 		Applications Device Connection
Number of ports 1 port
Compliant standards RS-232C
Transmission distance 15 m max.
Connector D-DUB 9-pin female connector
SD Memory
Card slot 		Applications To transfer or store the project or to store log data.
Number of slots 1 slot
Compliant standards SD/SDHC
Expansion
Unit
connector * 		Applications Expansion Unit
Quantity 1

* The serial port and Expansion Unit connector are for future expansion.

General Specifications

Item Specification
NA5-15W NA5-12W NA5-9W NA5-7W
Rated supply voltage 24 VDC
Allowable power
supply voltage range 		19.2 to 28.8 VDC (24 VDC ±20%)
Allowable
momentary power
interruption time 		Operation for momentary power interruption is not specified.
Power consumption 47 W max. 45 W max. 40 W max. 35 W max.
Ambient operating
temperature 		0 to 50°C *1 *2
Ambient storage
temperature 		-20 to +60°C *3
Ambient operating
humidity 		10 to 90% *2
Must be no condensation.
Atmosphere Must be free from corrosive gases.
Pollution degree 2 or less: JIS B 3502, IEC 61131-2
Noise immunity 2 kV on power supply line (Conforms to IEC 61000-4-4.)
Vibration resistance
(during operation) 		Conforms to IEC 60068-2-6.
5 to 8.4 Hz with 3.5 mm half amplitude and 8.4 to 150 Hz with 9.8 m/s2 for 100 minutes each in
X, Y, and Z directions
(Time coefficient of 10 minutes ✕ coefficient factor of 10 = total time of 100 min.)
Shock resistance
(during operation) 		Conforms to IEC 60028-2-27.
147 m/s2 3 times each in X, Y, and Z directions
Dimensions 420 ✕ 291 ✕ 69 mm
(W ✕ H ✕ D) 		340 ✕ 244 ✕ 69 mm
(W ✕ H ✕ D) 		290 ✕ 190 ✕ 69 mm
(W ✕ H ✕ D) 		236 ✕ 165 ✕ 69 mm
(W ✕ H ✕ D)
Panel cutout
dimensions 		392 +1,0 ✕
268 +1,0 mm
(horizontal ✕ vertical)
Panel thickness: 1.6
to 6.0 mm *4 		310 +1,0 ✕
221 +1,0 mm
(horizontal ✕ vertical)
Panel thickness: 1.6
to 6.0 mm *4 		261 +1,0 ✕
166 +1,0 mm
(horizontal ✕ vertical)
Panel thickness: 1.6
to 6.0 mm *4 		197 +0.5,0 ✕
141 +0.5,0 mm
(horizontal ✕ vertical)
Panel thickness: 1.6
to 6.0 mm *4
Weight 3.2 kg max. 2.3 kg max. 1.7 kg max. 1.3 kg max.
Degree of
protection 		Front-panel controls: IP65 oil-proof type, UL Type 4X (at initial state)
To reinstall the NA Unit in a panel, contact your OMRON representative for replacement of the
rubber packing.
Battery life Battery life: 5 years at 25°C
The RTC will be backed up for 5 days after the battery runs low. The RTC will be backed up by a
super capacitor for 5 minutes after removing the old battery.
(This assumes that the power is first turned ON for at least 5 minutes and then turned OFF.)
International
standards *5 		UL 508/CSA standard C22.2 No.142 *6
EMC Directive (2004/108/EC) EN 61131-2: 2007
Shipbuilding standards LR, DNV, and NK
IP65 oil-proof, UL Type 4X *7 (front panel only)
ANSI 12.12.01 Class 1 Division 2/CSA standard C22.2 No. 213-M1987 (R2013)
RoHS Directive (2002/95/EC)
KC Standards KN 61000-6-2: 2012-06 for EMS and KN 61000-6-4: 2012-06 for EMI
RCM

NA Series Specifications 12

1. The ambient operating temperature is subject to the following restrictions, depending on the mounting angle.
   • The ambient operating temperature is 0° to 40°C when the mounting angle is 0° or more and less than 45° to the horizontal.
   • The ambient operating temperature is 0° to 50°C when the mounting angle is 45° or more and 90° or less to the horizontal.
   • The ambient operating temperature is 0° to 50°C when the mounting angle is 90° or more and 135° or less to the horizontal.

2. Use the Programmable Terminal within the following temperature and humidity ranges.

NA Series Specifications 13

3. Store the Programmable Terminal within the following temperature and humidity ranges.

NA Series Specifications 14

4. When the NA-[]WATW01 High-pressure waterproof attachment is used, the panel thickness is between 1.6 to 4.5 mm.
5. Check with your OMRON representative or refer to the following OMRON website for the latest information on the applicable standards for each model: www.ia.omron.com.
6. Use power supply Class 2 to conform to UL Standards.
7. Use the NA-[]WATW01 High-pressure waterproof attachment (sold separately) to conform to UL Type 4X.

Version Information

NA series and Programming Devices

NA series Corresponding unit versions/version
Model NA system version NJ/NX/NY-series Controller
NX1P2-[][][][] NJ501-[][][][]
NY512-[][][][] NJ301-[][][][]
NY532-[][][][] NJ101-[][][][]
NX701-[][][][] 		Sysmac studio
NA5-15W
NA5-12W
NA5-9W
NA5-7W 		1.07 or later NX1P2: 1.13 or later 1.17 or higher
1.06 or later NY512: 1.12 or later
NY532: 1.12 or later 		1.17 or higher
1.02 or later NX701: 1.10 or later
NJ101: 1.10 or later 		1.13 or higher
1.01 or later NJ501: 1.01 or later
NJ501 Database Connection: 1.05 or later
NJ301: 1.01 or later 		1.11 or higher

Supported Devices

Manufacturer Models Connection method Communications driver
OMRON NX1P2-[][][][] NJ501-[][][][]
NY512-[][][][] NJ301-[][][][]
NY532-[][][][] NJ101-[][][][]
NX701-[][][][] 		Built-in EtherNet/IP port Ethernet
CJ2H-CPU64/65/66/67/68-EIP
CJ2M-CPU31/32/33/34/35 		Built-in EtherNet/IP port CIP Ethernet
CJ2H-CPU64/65/66/67/68-EIP
CJ2M-CPU31/32/33/34/35 		CJ1W-EIP21
CJ2H-CPU64/65/66/67/68-EIP
CJ2M-CPU31/32/33/34/35 		Built-in EtherNet/IP port FINS Ethernet
CJ1H-CPU65H/66H/67H
CJ1H-CPU65H/66H/67H-R
CJ1G-CPU42H/43H/44H/45H
CJ1M-CPU11/12/13/21/22/23
CJ2H-CPU64/65/66/67/68(-EIP)
CJ2M-CPU11/12/13/14/15
CJ2M-CPU31/32/33/34/35 		CJ1W-ETN21
CJ1W-EIP21