Omron, F3W-MA

last update: January 5, 2015

• A muting system can be configured easily in combination with the safety light curtain.

• Muting functions can be stably performed even when workpieces with holes pass.

last update: January 5, 2015

last update: August 17, 2015

Ratings/Specifications

			F3W-MA0100P	F3W-MA0300P
Perfor- mance	Beam Gap between Muting Trigger Beams		100 mm	300 mm
	Number of Beams		8	20
	Standard Detection Object		30 mm
	Operating Range	Long	0.3 to 20.0 m (1 to 65 ft.)
	Operating Range	Short	0.3 to 7.0 m (1 to 23 ft.)
	Response Time	Operation	13 ms max.
	Response Time	Reset	26 ms max. (Synchronized) 78 ms max. (Not synchronized)
	Effective Aperture Angle		±2.5° max., emitter and receiver at operating range of 3 m or greater
	Light Source		Infrared LEDs, Wavelength: 870 nm
	Startup Waiting Time		2 s max.
Elec- trical	Power Supply Voltage (Vs)		SELV/PELV 24 VDC±20% (ripple p-p 10% max.)
	Current Consumption	Emitter	35 mA	45 mA
	Current Consumption	Receiver	75 mA	75 mA
	Muting Outputs		Two PNP transistor outputs. * Load current of 300 mA max., Residual voltage of 2 V max. (except for voltage drop due to cable extension)
		* This product is a PNP output model. Use with the PNP output model safety light curtain.
	Output Operation Mode	Muting Output A	Dark-ON (Muting Output A is enabled when MuteA trigger beam is blocked.)
	Output Operation Mode	Muting Output B	Dark-ON (Muting Output B is enabled when MuteB trigger beam is blocked.)
	Input Voltage	ON Voltage	[MuteEnable] Vs to Vs-3 V (sink current 5 mA max.) *
		OFF Voltage	[Mute Enable] 0 to 1/2 Vs, or open *
		* The Vs indicates a supply voltage value in your environment.
	Indicators		Refer to "LED Indicator Status".
	Protective Circuit		Protective Circuit Output short protection, Power supply reverse polarity protection
	Insulation Resistance		20 MΩ or higher (500 VDC megger)
	Dielectric Strength		1,000 VAC, 50/60 Hz (1 min)
Func- tional	Functions		- Scan Code Selection - Operation Mode Selection (Point to Point Detection/Chattering and Void Space Prevention) - Off-Delay - Muting Enable - Muting Trigger Beam Allocation - Operating Range Selection
Environ- mental	Ambient Temperature	Operating	-10 to 55°C (13 to 131°F) (non-icing)
	Ambient Temperature	Storage	-25 to 70°C (-13 to 158°F)
	Ambient Humidity	Operating	35% to 85% (non-condensing)
	Ambient Humidity	Storage	35% to 95%
	Ambient Illuminance		Incandescent lamp: 3,000 Ix max. on receiver surface Sunlight: 10,000 Ix max. on receiver surface
	Degree of Protection (IEC 60529)		IP65 and IP67
	Vibration Resistance (IEC 61496-1)		10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps for all 3 axes
	Shock Resistance (IEC 61496-1)		100 m/s², 1000 shocks for all 3 axes
	Pollution Degree (IEC 60664-1)		Pollution Degree 3
Connec- tions	Extension of Power Cable		100 m max. Note: For T-Shaped configuration with COM lines, the length of cable extension is 30 m max.
Material			Housing: Aluminum, Cap: PBT, Front Window: PMMA, Cable: Oil resistant PVC, FE plate: SUS
Weight (packaged)			1.8 kg max.	2.8 kg max.
Included Accessories			Instruction Sheet

LED Indicator Status

Shown below are indication statuses of F3W-MA LED indicators when you purchased.

Emitter

Name of Indicator		Color	Illuminated	Blinking
Operating range	LONG	Green	Long Range mode is selected by DIP Switch.	-
Running	RUN	Green	Power is ON.	-
Error	ERR	Red	-	Error in emitter. Generic error happens.

Receiver

Name of Indicator		Color	Illuminated	Blinking
Top-beam-state	TOP	Blue	The top beam is unblocked.	-
Muting output A	MUTE A	Green	Muting Output A is activated.	-
Muting output B	MUTE B	Green	Muting Output B is activated.	-
Off-Delay	DELAY	Yellow	Off-Delay function is enabled by DIP Switch.	-
Chattering/ Void space	CHAT	Green	Chattering and Void Space Prevention mode is selected by DIP Switch.	-
Muting Enable	MUTE DISABLE	Red	The Muting Enable function is enabled and Muting Enable input is turned OFF by DIP Switch.	-
Error	ERR	Red	-	Error in receiver. Generic error happens.
Stable-state	STB	Green	Incident light level is 170% or higher of ON-threshold	-
Running	RUN	Green	Power is ON.	-
Communication	COM	Green	Synchronization between emitter and receiver is maintained.	Primary sensor] - Start-up (for approx. 3 s) - Synchronization between emitter and receiver is lost
Bottom-beamstate	BTM	Blue	The bottom beam is unblocked.	-