Omron, E2K-F Series

last update: April 21, 2017

• Flat Sensor with excellent space efficiency. (Model with built-in Amplifier is only 10 mm thick.)

• Direct mounting onto a metallic surface is possible.

last update: April 21, 2017

last update: September 24, 2012

Materials	Sensing surface	Heat-resistant ABS
Model		E2K-F10MC[]-A	E2K-F10MC[]
Sensing distance		10 mm (Sensing distance adjustable range: 4 to 10 mm)	10 mm ±10%
Set distance		0 to 7.5 mm *
Differential travel		15% max. of sensing distance
Detectable object		Conductors and dielectrics
Standard sensing object		Grounded metal plate: 50 × 50 × 1 mm
Response frequency		100 Hz
Power supply voltage (operating voltage range)		12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
Current consumption		10 mA max. at 24 VDC
Control output	Load current	NPN open collector, 100 mA max. (at 30 VDC)
Control output	Residual voltage	1.5 V max. (Load current: 100 mA, Cable length: 2 m)
Indicators		Detection indicator (red)
Number of turns of sensitivity adjustment		12 turns	-
Operation mode (with sensing object approaching)		NO (Refer to the timing charts under I/O Circuit Diagrams on Data Sheet for details.)
Protection circuits		Reverse polarity protection, Surge suppressor
Ambient temperature range		Operating/Storage: -10 to 55°C (with no icing or condensation)
Ambient humidity range		Operating/Storage: 35% to 95%	Operating/Storage: 35% to 95%
Temperature influence		±15% max. of sensing distance at 23°C in the temperature range of -10 to 55°C
Voltage influence		±2.5% max. of sensing distance at rated voltage at rated voltage ±10%
Insulation resistance		50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		500 VAC, 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 500 m/s² 3 times each in X, Y, and Z directions
Degree of protection		IP64 (IEC)	IP66 (IEC)
Connection method		Pre-wired Models (Standard cable length: 2 m)
Weight (packed state)		Approx. 35 g
Materials	Case	Heat-resistant ABS
Accessories		Instruction manual

* The value for the E2K-F10MC[]-A is when it is adjusted to 10 mm.

last update: September 24, 2012

Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.

E2K-F

TITLE	DOCUMENT TYPE	SIZE
E2K-F Data Sheet	Catalog	326 KB
E2K Static Capacitance Proximity Switch Instruction Sheet	Manual	1859 KB

E2K-F

Group Sites

Our Partner Sites

Subscribe Our Newsletter