Omron, G2RV-SR Series

• Realized about 25% lower profile than conventional products, contributing to further miniaturization of the control panel.

• Realized opening and closing ability with one pole 6 A slim shape.

• Micro load products for one pole 50 mA using Au-plated contacts for small load switching also available.

• Since G2RV is a transparent case, confirming the state of the contact with the naked eye is possible, and easy to confirm abnormality on-site (installed location).

• Screw terminal is also stocked to meet the screw type needs.

• Mounted relay uses plug-in terminals that are difficult to bend when exchanging.

• G3RV-SR featuring a solid state relay similar in shape to G2RV-SR also available.

Ratings

Coil ratings

Rated input voltage	Rated current			Must operate voltage	Must release voltage	Power consumption		Maximum allowable voltage
	AC		DC	Percentage of the rated voltage		AC (VA)	DC (mW)	Percentage of the rated voltage
	50 Hz	60 Hz	DC	Percentage of the rated voltage		AC (VA)	DC (mW)	Percentage of the rated voltage
12 VDC	-	-	27.9 mA	80% max.*	10% min.	-	Approx. 300 mW	110%
24 VDC	-	-	13.5 mA			-	Approx. 300 mW
24 VAC/VDC	12.5 mA	12.6 mA	12.6 mA			Approx. 0.5 VA	Approx. 300 mW
48 VAC/VDC	5.9 mA	6.1 mA	5.2 mA			Approx. 0.4 VA	Approx. 250 mW
100 VAC	5.9 mA	6.0 mA	-			Approx. 0.8 VA	-
110 VAC	5.9 mA	5.9 mA	-			Approx. 0.8 VA	-
200 VAC	6.6 mA	7.6 mA	-			Approx. 1.7 VA	-
230 VAC	7.3 mA	8.4 mA	-			Approx. 1.7 VA	-

Note: The operating characteristics are measured at ambient temperature of 23°C.
* Operating voltage will be, for mounting in the upside down direction, 85% max.
(Upside down: Direction in which the mechanical indicator faces down)

Contact ratings

Item	Standard (G2RV-SR700, 500, 701, 501)		For microloads (G2RV-SR700-AP, 500-AP) *2
Contact configuration	SPDT
Load	Resistive load (cosφ=1)	Inductive load (cosφ=0.4, L/R=7ms)	Resistive load (cosφ=1)
Rated load	6 A at 250 VAC 6 A at 30 VDC	2.5 A at 250 VAC 2 A at 30 VDC	50 mA at 30 VAC 50 mA at 36 VDC
Rated carry current	6 A		50 mA
Maximum switching voltage	440 VAC, 125 VDC		30 VAC, 36 VDC
Maximum switching current	6 A		50 mA
Maximum switching power	1,500 VA 180 W	500 VA 60 W	-
Failure rate P value (reference value) *1	10 mA at 5 VDC		1 mA at 100 mVDC

*1. P level: λ₆₀=0.1×10^-6/times
This value is the value in switching frequency 120 operations/min.
*2. If the Au plating layer is destroyed, the number will be the same as the standard type.

Characteristics

Item		Standard (G2RV-SR700, 500, 701, 501)	For microloads (G2RV-SR700-AP, 500-AP)
Contact resistance *		100 mΩ max.
Operate (Set) time *		20 ms max.
Release time *		AC, AC/DC: 40 ms max. DC: 20 ms max.
Maximum operating frequency		Mechanical: 18,000 operations/h Electrical: 1,800 operations/h (rated load)
Insulation resistance		1,000 MΩ min. (at 500 VDC)
Dielectric strength		Between coil and contacts: 4,000VAC 50/60 Hz 1 min Contact between the same polarity: 1,000 VAC 50/60 Hz 1 min
Vibration resistance		Destruction: 10 to 55 to 10 Hz, single amplitude 0.50 mm (double amplitude 1.0 mm) Malfunction: 10 to 55 to 10 Hz, single amplitude 0.50 mm (double amplitude 1.0 mm)
Shock resistance		Destruction: 1,000 m/s² Malfunction: Energized 200m/s², Non-energized 100m/s²
Endurance *	Mechanical	5,000,000 operations min.
Endurance *	Electrical	NO contact: 70,000 operations min. NC contact: 50,000 operations min.	5,000,000 operations min.
Ambient operating temperature		Operating: -40 to +55°C (with no icing or condensation)
Ambient operating humidity		Operating: 5 to 85% RH
Weight		Approx. 30 g
Contact material		Ag alloy	Ag alloy + Au plating

Note: Above values are initial values.
* Value is at ambient temperature of 23°C.

Approved standards

UL508 (file No.E41643)

Model	No. of poles	Operation coil ratings	Contact ratings	Operations
G2RV-SR series	SPDT	12 to 48 VDC 24 to 230 VAC	6 A at 250 VAC (Resistive load) 6 A at 30 VDC (Resistive load) 2 A at 400 VAC (Resistive load)*	6,000

* If the load voltage exceeds 250 VAC, please attach with a spacing of 12 mm min., or use a separate plate (XW5Z-EP12).

TÜV (EN 61810-1)

Model	No. of poles	Operation coil ratings	Contact ratings	Operations
G2RV-SR series	SPDT	12, 24 VDC 24, 48 VAC/VDC 100, 110, 200, 230 VAC	6 A at 250 VAC (Resistive load) 6 A at 30 VDC (Resistive load) 2 A at 400 VAC (Resistive load)*	50,000 50,000 6,000

* If the load voltage exceeds 250 VAC, please attach with a spacing of 12 mm min., or use a separate plate (XW5Z-EP12).

(Unit: mm)

Slim I/O Relay + socket

Push-In Plus Terminal Block

Models without latching lever (without test switch)
G2RV-SR500
G2RV-SR500-AP

Models with latching lever (with test switch)
G2RV-SR501

Screw terminal

Models without latching lever (without test switch)
G2RV-SR700
G2RV-SR700-AP

Models with latching lever (with test switch)
G2RV-SR701

Relay for maintenance

Models without latching lever
G2RV-1-S-G
G2RV-1-S-AP-G

Models with latching lever (test switch)
G2RV-1-SI-G

Accessories (order separately)

PLC interface unit

Push-IN
P2RVC-8-I-5(-1)
P2RVC-8-O-5(-1)

Screw
P2RVC-8-I-7-1
P2RVC-8-O-7-1

Except for PLC interface unit

Short Bars
PYDN-6.2-[][] (6.2 mm)

Please click image to enlarge (open in a new window).

Separate Plate
XW5Z-EP12

TITLE	DOCUMENT TYPE	SIZE
G2RV-SR/G3RV-SR	Catalog	7935 KB
Push-In Plus Terminal Block Series Pamphlet	Catalog	7307 KB
Innovation in Control Panel Building	Catalog	13592 KB
Relay Defects Causes & Solutions (General-purpose Relay Edition)	Technical Guide	4100 KB