The ultra-slim unit with a thickness of 8 mm 0.315 in allows easy installation in a limited space such as the inside of equipment.
The belt-shaped laser beam with a measurement width of 10 mm 0.394 in is used for measurement of dimensions and positions.
The HG-T series boasts repeatability*2 of 1 μm 0.039 mil and offers the highest*1 measurement accuracy in the industry.
● | Sampling cycle setting can be selected from two options. Standard: 1 ms, High speed: 0.5 ms. |
---|---|
● | Average count setting can be selected from 11 options. 1 time, 2 times, 4 times, 8 times, 16 times, 32 times, 64 times, 128 times, 256 times, 512 times, 1,024 times |
*1 | As of November 2020, in-company survey |
---|---|
*2 | This is the P-P value of digital measurement value with half shading at the middle position of the installation distance. |
Two types of sensor heads, one with a standard type receiver and the other with a slim type receiver, are available.
Side view attachment (optional) is available for the standard type sensor head HG-T1010. This attachment can bend the laser beam at a right angle to allow flexible installation of the sensor head.
|
|
The standard type sensor head HG-T1010 indicates the direction of receiver displacement relative to the emitter on the controller's display screen and with the beam axis adjustment indicators on the receiver in an easy-to-understand fashion.
* The slim type sensor head HG-T1110 displays the displacement information only on the
controller's display section.
The HG-T series automatically recognizes the positional relationship of the emitter and receiver connected to the sensor head connection cable at the time the controller is turned ON. This function eliminates the need for identifying the correct cables to connect to the emitter and receiver. Wiring can be completed by simply attaching the connectors to the emitter and receiver. |
* The sensor head connection cable is branched into two cables on the sensor head connecting side, but the two cables can be connected interchangeably to the emitter and receiver. |
The sensor head case is made of light and strong die-cast aluminum. It minimizes measurement fluctuations due to temperature effects. The die-cast aluminum case does not easily become distorted in shape by tightening of mounting screws as compared to a resin case. It is highly resistant to deterioration due to ageing. This robust case helps prevent deviations of beam axis alignment. |
The HG-T series features a protection structure of IP67(IEC) so it can be used in a place where the product may be exposed to water or large amounts of dust.
|
The 2-line digital display simultaneously shows head measurement (measured value) and judgment value (calculated value).
The high-contrast LCD provides sharp and clear indications and wide viewing angle.
Values between allowable maximum and minimum values are indicated in green. Values outside of the allowable range are indicated in orange. This provides at-a-glance understanding of the margin to the tolerance limits.
|
|
|
|
|
|
Notifies when the detection performance decreases due to accumulated stains.
|
The judgment level can be adjusted according to the degree of transparency.
The judgment filter value can be adjusted for the prevention of erroneous detections due to fine foreign matters.
The judgment filter value can be set to a desired value between 3 and 50.
|
If there is a sudden change in the edge position of the work piece, the change is invalidated and the judgement value is stabilized.
* This change will be applied from production in November 2020.
The USB communication unit provides convenient functions that facilitate the setting of the HG-T series while observing the waveform of received light by operating the dedicated USB-based PC setting software. The USB-based PC setting software can be downloaded free from our website.
*1 | When connected to the communication unit for digital displacement sensor, up to 14 slave units can be connected per master unit. |
---|---|
*2 | Dependent on PC environment. |
Sensor head (Standard type)
Sensor head (Slim type)
Side view attachment (Optional)
|
|
Controller (Master unit)
Controller (Slave unit)
Controller (Slave unit)
Sensor head connection cable
USB communication unit
Please check each dimensions page for communication units for Digital Displacement Sensors.
CC-Link IE Field / CC-Link Communication unit Dimensions
Communication Unit for Digital Displacement sensor SC-HG1 Dimensions
End plate (Optional)
|
TITLE | DOCUMENT TYPE | SIZE |
HG-T | Catalog | 3853 KB |
---|---|---|
Self-Monitoring Sensor HG-T / HG-S | Catalog | 1838 KB |
HG-T series | Manual | 3615 KB |
HG-T1010 | Manual | 524 KB |
HG-T1110 | Manual | 406 KB |
HG-TC□ | Manual | 779 KB |
SC-HG1-USB | Manual | 1004 KB |
HG-T Configuration Tool | Manual | 1230 KB |