We have prepared a lineup, tailor-made to fit with your devices and applications.
150 to 6,100 mm (in 10 mm increments)
34 to 80 mm in six series
By covering just 4 points, a ready-to-use safety edge will be delivered to you:
Select a shape from five series as required in your application or equipment
Select wiring from four types (2-wire/connector (male/female) cable, terminating resistor) and cable length from 100 mm to 10,000 mm (in 100 mm increments) for both ends of the safety edge.
Select the length of the safety edge between 150 mm to 6,100 mm (in 10 mm increments).
An L-shaped mounting base is also provided depending on the mounting location (except the SGE-125 series)
Note: For details, refer to "Model Number Structure" on catalog.
Dedicated SCC edge controller that regulates a system conforming to safety category 3.
Dedicated SCC edge controller enables establishment of a safety system conforming to PLe safety category 3
(when hazards are directly blocked by built-in relays)
Any short-circuits or breaks in the system are monitored and its status is indicated with LED.
Authentificated under major safety standards
Note: For details on LED indicators, refer to "Connection" on Catalog.
last update: January 19, 2016
| Model |
SCC-1224 SCC-1224ND |
|---|---|
| Safety edge inputs | Up to five series connections on the safety edges |
| Response time | 13 ms max. |
| Power supply voltage | 115 VAC±5%, 3.3 VA or 24 VDC±10%, 1.5 VA |
| Safety output | DPST-NO (Rated resistive load: 250 VAC/30 VDC 4A) |
| Auxiliary output |
SPST-NO SCC-1224: One-shot timer that turns ON between two and three seconds after the application of pressure to the safety edge SCC-1224ND: Kept ON during the application of pressure to the safety edge (Rated resistive load: 250 VAC, 2.5 A/30 VDC, 2.5 A) |
| Terminating resistor | 8.2 kΩ |
| Ambient operating temperature | -20 to 50°C (With no icing or condensation) |
| Degree of protection | IP20 |
| Terminal type | Screw terminals |
| Terminal tightening torque | 0.5 to 0.6 Nm |
| Mounting method | DIN rail mounted |
| Weight (factory-set) | 210 g |
| Model | SGE-125 | SGE-225 *4 |
SGE-245 SGE-245L |
SGE-365 |
|---|---|---|---|---|
| Material *1 | TPE | EPDM | ||
| Material hardness | 65 Shore A | 68 Shore A | ||
| Max. length of a single safety edge | 6.1 m | |||
| Actuation distance *2 | 2.6 mm | 3.9 mm | 7.4 mm | 5.2 mm |
| Actuation force *2 | 42 N | 57 N | 68 N | 78 N |
| Maximum allowable load | 500 N | |||
| Overtravel distance *2 (400 N) | 9.5 mm | 6.7 mm | 18.3 mm | 33.8 mm |
| Maximum operation angle | 2 x 30° | 2 x 45° | ||
| Inactive end region *3 | 20 mm | 40 mm | 20 mm | |
| Connecting cable |
2 conductors, 0.34 mm2, Allowable bending radius: R38mm Cable Specifications Type: PUR (Polyurethane) Round lead cable External diameter: 3.5 dia. Number of conductors: 2 conductors Cross-section of conducto: 0.34 mm2 Insulator diameter: 1.2 dia. |
|||
| Mechanical durability | 10,000 operations min. | |||
| Ambient temperature |
During operation: -10 to 55°C (with no icing), During storage: -25 to 75°C (with no icing) |
|||
| Operating ambient humidity | 0 to 90%RH | |||
| Degree of protection | IP65 | |||
| Unit weight | 0.18 kg/m | 0.51 kg/m |
0.77 kg/m (SGE-245) 0.82 kg/m (SGE-245L) |
1.10 kg/m |
*1. TPE: Thermoplastic Elastomer
EPDM: Ethylene Propylene Rubber
*2. Values of actuation distance and actuation force are characteristic values tested according to EN 1760-2 using a test
object of ϕ80 mm and actuating point C3 under a test temperature of 20°C and test speed v = 10 mm/s. Refer to
“Characteristics” on Catalog for details.
*3. There is an inactive region (including an end cap) in both ends of the safety edge.
*4. The SGE-225 can be used for finger protection.The actuation force is 20 N when the SGE-225 is used for finger protection.
(Characteristic values tested according to EN 1760-2 using a test object of ϕ20 mm and actuating point C3 under a
test temperature of 20°C and test speed v = 10 mm/s)
Automation Systems 
Motion & Power Solutions 
Safety, Vision and IDENT 
Sensing Solutions 
Control Components 
Switching & Accessories 
Switchgear and Trolley Systems 
Process Weighing 
LED Lighting 
Omron
Mitsubishi
Delta
Autonics
Inno
Panasonic
Novotechnik
Orientalmotor
Microscan
IPA
Technomech
Intech
Honeywell
IOT & Traceability
Project & Panel Engg.
Application Case Studies
Solutions by Industry
Solutions by Process
Solutions by Product
Youtube Videos
Corporate Information
Company Profile
Quality Policy
Mission Statement
Chairman's Message
Intech Group Companies
