Omron, G7S-[]-E Series

last update: December 19, 2013

• Relays with forcibly guided contacts (EN50205 Class A, certified by VDE).

• Supports the CE marking of machinery (Machinery Directive).

• Helps avoid hazardous machine status when used as part of an interlocking circuit.

• Track-mounting and back-mounting sockets are available.

last update: December 19, 2013

last update: March 07, 2013

Ratings

Coil

Rated voltage	Rated current (mA)	Coil resistance (Ω)	Max. voltage (V)	Power consumption (W)
24 VDC	30	800	110%	Approx. 0.8

Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of ±15%.
2. The maximum voltage is based on an ambient operating temperature of 23°C maximum.

Contacts

Load		Resistive load
Rated load	NO contact	10 A at 250 VAC 10 A at 30 VDC
Rated load	NC contact	6 A at 250 VAC 6 A at 30 VDC
Rated carry current	NO contact	10 A
Rated carry current	NC contact	6 A
Maximum switching voltage		250 VAC, 30 VDC
Maximum switching current	NO contact	10 A
Maximum switching current	NC contact	6 A

G7S-[]-E Characteristics of Sockets

Model	P7S-14F-END	P7S-14P-E
Continuous current	P7S-14P-E
Dielectric strength	2000 VAC for 1 min. between terminals
Insulation resistance	1000 MΩ min. *
Weight	Approx. 110g	Approx. 25g

Note: Use the P7S-14F-END in the ambient humidity range of 35 to 85%.
* Measurement conditions: Measurement of the same points as for the dielectric strength at 500 VDC.

Characteristics

*Contact resistance 1**		100 mΩ max.
*Operating time 2**		50 ms max.
*Release time 2**		50 ms max.
Must operate voltage		80% max.
Must release voltage		10% min.
Maximum operating frequency	Mechanical	18,000 operations/h
Maximum operating frequency	Rated load	1,800 operations/h
*Insulation resistance 3**		100 MΩ min.
*Dielectric strength 4 5*		Between coil and contacts: Between coil and pole 3 or coil and pole 4: 4,000 VAC, 50/60 Hz for 1 min Other than the above:2,500 VAC, 50/60 Hz for 1 min Between different poles: Between pole 1, 3, or 5 and pole 2, 4, or 6: 4,000 VAC, 50/60 Hz for 1 min Other than the above:2,500 VAC, 50/60 Hz for 1 min Between contacts of same polarity:1,500 VAC, 50/60 Hz for 1 min
Vibration resistance	Destruction	10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Vibration resistance	Malfunction	10 to 55 to 10 Hz, 0.375-mm single amplitude (0.75-mm double amplitude)
Shock resistance	Destruction	1,000 m/s²
Shock resistance	Malfunction	100 m/s²
*Durability 6**	Mechanical	10,000,000 operations min. (at approx. 18,000 operations/h)
*Durability 6**	Electrical	100,000 operations min. (at the rated load and approx. 1,800 operations/h)
Inductive load switching capability *7 (IEC60947-5-1)	NO Contact	AC15 AC240V 5A DC13 DC24V 2A
Inductive load switching capability *7 (IEC60947-5-1)	NC Contact	AC15 AC240V 3A DC13 DC24V 2A
Failure rate (P level) (reference value *8)		5 VDC, 1 mA
Ambient operating temperature		-25 to 70°C (with no icing or condensation)
Ambient operating humidity		5% to 85%
Weight		Approx. 65 g

Note: 1. The above values are initial values.
2. Performance characteristics are based on a coil temparature of 23°C.
*1. Measurement conditions: 5 VDC, 10 mA, voltage drop method.
*2. Measurement conditions: Rated voltage operation
Ambient operating temperature: 23°C
Contact bounce time is not included.
*3. The insulation resistance was measured with a 500-VDC megohmmeter at the same locations as the dielectric strength was measured.
*4. When using a P7S Socket, the dielectric strength between coil and contacts and between different poles is 2,000 VAC, 50/60 Hz for 1 min.
*5. The coil refers to terminals 0-1, pole 1 refers to terminals 13−14, pole 2 refers to terminals 23−24, pole 3 refers to terminals 33−34, pole 4 refers to terminals 41−42 or 43−44, pole 5 refers to terminals 51−52, and pole 6 refers to terminals 61−62.
*6. The durability is for an ambient temperature of 15 to 35°C and an ambient humidity of 25% to 75%.
*7. AC15: cosφ = 0.3, DC13: L/R = 96-ms
*8. The failure rate is based on an operating frequency of 60 operations/min.

last update: March 07, 2013

Relays with Forcibly Guided Contacts

G7S-4A2B-E
G7S-3A3B-E

Sockets

Track-mounting Socket
P7S-14F-END

Back-mounting Socket (PCB Terminals)
P7S-14P-E

TITLE	DOCUMENT TYPE	SIZE
G7S-[]-E Data Sheet	Catalog	516 KB