Omron, V680 Series

last update: April 3, 2017

• High-speed communications and highly reliable communications provided with an electromagnetic induction system and unique technology.

• Antennas and RF Tags with excellent environmental resistance.

• Wide line-up of ultra-compact, long-life RF Tags, with capacities from 1 to 8 kbytes.

• Visualizes the communications status for simple analysis of the operating environment.

• Complies with FCC Rules and R&TTE Directive.

last update: April 3, 2017

RF Tag (1-kbyte Memory)

Model	V680- D1KP52MT	V680- D1KP54T	V680- D1KP66T	V680- D1KP66MT	V680- D1KP53M	V680- D1KP66T-SP
Memory capacity	1,000 byte (user area)
Memory type	EEPROM
*Data retention time 1**	10 years after writing (85 °C max.)
Write endurance	100,000 times per block (at 25 °C)
Ambient operating temperature (during communication)	- 25 to 85 °C (with no icing)					- 25 to 70 °C (with no icing)
Ambient storage temperature (during data backup)	-40 to 125°C (with no icing) Heat resistance: 1,000 thermal cycles each of 30 minutes at -10°C/150°C, Hightemperature storage: 1,000 hours at 150°C 2 200 thermal cycles each of 30 minutes at -10°C/180°C, Hightemperature storage: 200 hours at 180°C 3				-40 to 125°C (with no icing)	- 40 to 110 °C (with no icing)
Ambient operating humidity	35 to 95%
Degree of protection	IP68 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *4	IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *4	IP68 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *4			IP67
Vibration resistance	10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s² acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each
Shock resistance	500 m/s² in X, Y, and Z directions 3 times each (18 times in total)
Appearance	8 dia. × 5 mm	20 dia. × 2.7 mm	34 × 34 × 3.5 mm		10 dia. × 4.5 mm (DIN698373)	95 × 36.5 × 6.5 mm (excluding protrusions)
Materials	Case: PPS resin Filling: Epoxy resin	Molding: PPS resin			Case: PPS resin Filling: Epoxy resin	External resin: PFA Tag body: PPS resin
Weight	Approx. 0.5 g	Approx. 2 g	Approx. 6 g	Approx. 7.5 g	Approx. 1 g	Approx. 20 g
Metallic compatibility	Yes	No	No	Yes	Yes	No

Note: For details, refer to the User's Manual (Cat. No. Z262).
*1. Refer to the User's Manual (Cat. No. Z262) for data retention time for temperatures of 85°C or higher. If the V680 has
been stored at 125°C or higher, write the data again even if the data does not need to be changed.
*2. 150°C heat resistance: The heat resistance has been checked at 150°C for up to 1,000 hours, and thermal shock has
been checked through testing 1,000 thermal cycles each of 30 minutes at −10/150°C. (Test samples: 22, defects: 0)
*3. 180°C heat resistance: The heat resistance has been checked at 180°C for up to 200 hours, and thermal shock has
been checked through testing 200 thermal cycles each of 30 minutes at −10°C/180°C. (Test samples: 22, defects: 0)
*4. Oil resistance has been tested using a specific oil as defined in the OMRON test method.

RF Tag with 1-kbyte Memory with High-temperature Capability

Model	V680-D1KP58HTN
Memory capacity	1,000 bytes (user area)
Memory type	EEPROM
Data Retention	10 years after writing (85°C or less), 0.5 year after writing (85°C to 125°C) Total data retention at high temperatures exceeding 125°C is 10 hours *1
Write Endurance	100,000 times per block (25°C)
Ambient operating temperature	-25°C to 85°C (with no icing)
Ambient storage temperature	-40 to 250°C (with no icing) *2 (Data retention: -40 to 125°C) 1. 2,000 cycles of 30 minutes each between room temperature and 200°C 2. 500 hours at 250°C
Ambient storage humidity	No restrictions.
Degree of protection	IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *3
Vibration resistance	10 to 2,000 Hz, 1.5-mm double amplitude, acceleration: 150 m/s², 10 sweeps each in X, Y, and Z directions for 15 minutes each
Shock resistance	500 m/s², 3 times each in X, Y, and Z directions (total: 18 times)
Materials	PPS resin
Weight	Approx. 70 g

*1 After storing data at high temperatures, rewrite the data even if changes are not required. High temperatures are
those exceeding 125°C up to 250°C.
*2 Storing RF Tags under high temperatures or under heat cycles will adversely affect the performance of the
internal parts and the service life of the RF Tags.
The RF Tag were placed in the following high temperatures and then evaluated in-house.
It was confirmed that no problems occurred.
1. 2,000 cycles of 30 minutes each between room temperature and 200°C.
2. 500 hours at 250°C.
*3 Oil resistance has been tested using a specific oil as defined in the OMRON test method.

RF Tag (2-kbyte Memory)

Model	V680S-D2KF67	V680S-D2KF67M	V680S-D2KF68	V680S-D2KF68M	V680-D2KF52M
Memory capacity	2,000 bytes (user area)
Memory type	FRAM
*Data retention time 1**	10 years after writing at 85°C				10 years after writing (55°C max.)
Write endurance	One trillion writes for each block(85°C or less), Number of accesses *2: One trillion writes				Access frequency per block *2: 10 billion times
Ambient operating temperature	-20 to 85°C (with no icing)				-25 to 85°C (with no icing)
Ambient storage temperature	-40 to 125°C (with no icing)				-40 to 85°C (with no icing)
Ambient operating humidity	35 to 85%				35 to 95%
Degree of protection	IP68 (IEC 60529:2001), Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *3 IPX9K (DIN 40 050)				IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *3
Vibration resistance	10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s² acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each		No abnormality after application of 10 to 500 Hz, 1.5-mm double amplitude, acceleration: 100 m/s², 10 sweeps each in X, Y, and Z directions for 11 minutes each		10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s² acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each
Shock resistance	500 m/s² in X, Y, and Z directions 3 times each (Total:18 times)
Appearance	40 × 40 × 5 mm		86 × 54 × 10 mm		8 dia. × 5 mm
Materials	Exterior: PPS resin				Case: PPS resin Filling: Epoxy resin
Weight	Approx. 12 g	Approx. 11.5 g	Approx. 44 g	Approx. 46 g	Approx. 0.5 g
Metallic compatibility	No	Yes	No	Yes	Yes

Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z339).
*1. Refer to the User's Manual (Cat. No. Z248) for data retention time for temperatures of 55°C or higher.
*2. The total Read or Write communication frequency is called the access frequency.
*3. Oil resistance has been tested using a specific oil as defined in the OMRON test method.

RF Tag with 8-kbyte Memory

Model	V680S-D8KF67	V680S-D8KF67M	V680S-D8KF68	V680S-D32KF68M
Memory capacity	8,192 bytes (user area)
Memory type	FRAM
Data retention time	10 years after writing (85°C or less)
Write endurance	1 trillion times per block. *1 Access frequency: 1 trillion times:
Ambient operating temperature	-20 to 85°C (with no icing)
Ambient storage temperature	-40 to 125°C (with no icing)
Ambient operating humidity	35 to 85%
Degree of protection	IP68 (IEC 60529:2001), Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *2 IPX9K (DIN 40 050)
Vibration resistance	10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s² acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each		10 to 500 Hz, 1.5-mm double amplitude at 100 m/s² acceleration with 10 sweeps in X, Y, and Z directions for 11 minutes each
Shock resistance	500 m/s² in X, Y, and Z directions 3 times each (18 times in total)
Dimensions	40 × 40 × 4.5 mm		86 × 54 × 10 mm
Materials	Molding: PPS resin
Weight	Approx. 11.5 g	Approx. 12 g	Approx. 44 g	Approx. 46 g
Metallic compatibility	No	Yes	No	Yes

Note: For details, refer to the User’s Manual (Cat. No. Z339).
*1. The total Read or Write communication frequency is called the access frequency.
*2. Oil resistance has been tested using a specific oil as defined in the OMRON test method.

Bolt RF Tags (1-kbyte Memory)

Model	V680-D1KP52M-BT01	V680-D1KP52M-BT11
Memory capacity	1,000 bytes (user area)
Memory type	EEPROM
Data retention time	10 years after writing (85°C or less), 0.5 years after writing (85 to 125°C) Total data retention at high temperatures exceeding 125°C is 10 houres
Write endurance	100,000 times per block (at 25°C)
Ambient operating temperature (during communication)	-25 to 85°C (with no icing)
Ambient storage temperature (during data backup)	-40 to 125°C (with no icing)
Ambient operating humidity	35 to 95%
Degree of protection	IP68 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *
Vibration resistance	10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s² acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each
Shock resistance	500 m/s² in X, Y, and Z directions 3 times each (18 times in total)
Materials	Bolt: SUS303, Case (RF Tag): PPS resin, Filling (RF Tag): Epoxy resin
Weight	Approx. 25 g	Approx. 10 g

* Oil resistance has been tested using a specific oil as defined in the OMRON test method.

Bolt RF Tags (2-kbyte Memory)

Model	V680-D2KF52M-BT01	V680-D2KF52M-BT11
Memory capacity	2,000 bytes (user area)
Memory type	FRAM
Data retention time	10 years after writing (55°C or less), 2.9 years after writing (85°C max.)
Write endurance	10 billion reads/writes per block, Number of accesses *1: 10 billion times
Ambient operating temperature (during communication)	-25°C to 85°C (with no icing)
Ambient storage temperature (during data backup)	-40°C to 85°C (with no icing)
Ambient operating humidity	35 to 95%
Degree of protection	IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *2
Vibration resistance	10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s² acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each
Shock resistance	500 m/s² in X, Y, and Z directions 3 times each (18 times in total)
Materials	Bolt: SUS303, Case (RF Tag): PPS resin, Filling (RF Tag): Epoxy resin
Weight	Approx. 25 g	Approx. 10 g

*1 The number of accesses is the total number of communications for reading or writing.
*2 Oil resistance has been tested using a specific oil as defined in the OMRON test method.

Cylindrical Antenna (Detachable Amplifier Unit Type)

Model	V680-HS51 (Standard Cable, Non-waterproof Connector)	V680-HS52-W (Standard Cable, Waterproof Connector)	V680-HS52-R (Standard Cable, Non-waterproof Connector)
Ambient operating temperature	-10°C to 60°C (with no icing)
Ambient storage temperature	-25°C to 75°C (with no icing)
Ambient operating humidity	35% to 95% (with no condensation)
Insulation resistance	20 MΩ min. (at 500 VDC) between the cable terminals and the case
Dielectric strength	1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection	IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) (Antenna portion) *2	IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) (Antenna portion) *1	IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) (Antenna portion) *2
Vibration resistance	10 to 2,000 Hz variable vibration, 1.5-mm double amplitude at 150 m/s² acceleration, with 10 sweeps in X, Y, and Z directions for 15 minutes each	10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s² acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each
Shock resistance	1,000 m/s² in X, Y, and Z directions 3 times each (18 times in total)	500 m/s² in X, Y, and Z directions 3 times each (18 times in total)
Appearance	M12 × 35 mm	M22 × 65 mm
Materials	ABS, brass, epoxy resin filling
Weight	Approx. 55 g (with 2-m cable)	Approx. 850 g (with 12.5-m cable)

Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
*1. The degree of protection for the Connector is IP67/IP65. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM1030 standard. *2. The Connector is not waterproof. Oil resistance has been tested using a specific oil as defined in the OMRON test method.

Square Antenna (Detachable Amplifier Unit Type)

Model	V680-HS63-W (Standard Cable, Waterproof Connector)	V680-HS63-R (Flexible Cable, Non-waterproof Connector)
Ambient operating temperature	-10°C to 60°C (with no icing)
Ambient storage temperature	-25°C to 75°C (with no icing)
Ambient operating humidity	35% to 95% (with no condensation)
Insulation resistance	20 MΩ min. (at 500 VDC) between the cable terminals and the case
Dielectric strength	1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection	IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) (Antenna portion) *1	IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) (Antenna portion) *2
Vibration resistance	10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s² acceleration, with 10 sweeps in X, Y, and Z directions for 11 minutes each
Shock resistance	500 m/s² in X, Y, and Z directions 3 times each (18 times in total)
Appearance	40 × 53 × 23 mm
Materials	ABS, epoxy resin filling
Weight	Approx. 850 g (with 12.5-m cable)

Model	V680-HS65-W (Standard Cable, Waterproof Connector)	V680-HS65-R (Flexible Cable, Non-waterproof Connector)
Ambient operating temperature	-25°C to 70°C (with no icing)
Ambient storage temperature	-40°C to 85°C (with no icing)
Ambient operating humidity	35% to 95% (with no condensation)
Insulation resistance	20 MΩ min. (at 500 VDC) between the cable terminals and the case
Dielectric strength	1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection	IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) (Antenna portion) *1	IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) (Antenna portion) *2
Vibration resistance	10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s² acceleration, with 10 sweeps in X, Y, and Z directions for 11 minutes each
Shock resistance	500 m/s² in X, Y, and Z directions 3 times each (18 times in total)
Appearance	100 × 100 × 30 mm
Materials	ABS, epoxy resin filling
Weight	Approx. 1,100 g (with 12.5-m cable)

Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
*1. The degree of protection for the Connector is IP67/IP65. Oil resistance has been tested using a specific oil as defined in the OMRON test method.
*2. The Connector is not waterproof. Oil resistance has been tested using a specific oil as defined in the OMRON test method.

Square Antenna with Built-in Amplifier

Model	V680-H01-V2
Ambient operating temperature	-10°C to 55°C (with no icing)
Ambient storage temperature	-35°C to 65°C (with no icing)
Ambient operating humidity	35% to 85% (with no condensation)
Insulation resistance	20 MΩ min. (at 100 VDC) between connector terminals and the rear plate
Dielectric strength	1,000 VAC, 50/60 Hz for 1 min between connector terminals and the rear plate
Degree of protection	IP63.(IEC60529); Mounting direction: Communications surface facing up
Vibration resistance	10 to 150 Hz, 0.35-mm single amplitude, acceleration: 50 m/s², 10 sweeps in each of 3 axis directions (up/down, left/right, and forward/backward) for 8 minutes each
Shock resistance	150 m/s², 3 times each in 6 directions (Total: 18 times)
Appearance	200 × 250 × 40 mm
Material	Polycarbonate (PC) resin, ASA resin/Rear Panel: Aluminum
Weight	Approx. 900 g
Cable length	0.5 m (use a relay cable to connect to the Controller up to 30.5 m)

Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z262).

Amplifier Unit

Model	V680-HA63A	V680-HA63B
Ambient operating temperature	-10°C to 55°C (with no icing)
Ambient storage temperature	-25°C to 65°C (with no icing)
Ambient operating humidity	35% to 85% (with no condensation)
Insulation resistance	20 MΩ min. (at 500 VDC) between the cable terminals and the case
Dielectric strength	1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection	IP40 (IEC60529) *1	IP67/IP65 (IEC60529) *2
Vibration resistance	10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s² acceleration, with 10 sweeps in X, Y, and Z directions for 11 minutes each
Shock resistance	500 m/s² in X, Y, and Z directions 3 times each (18 times in total)
Appearance	25 × 40 × 65mm (not including projections)
Material	Polycarbonate (PC) resin
Weight	Approx. 650 g (with 10-m cable)
Cable length	5 m, 10 m
Transmittable RF Tags	1-kbyte memory	2-, 8-kbyte memory

Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
*1. When connected to the V680-HS[][]-R or V680-HS52-R.
*2. When connected to the V680-HS[][]-W or V680-HS52-W. (Not including the Connector on the Controller.)

ID Controller

Model	V680-CA5D01-V2	V680-CA5D02-V2
Power supply voltage (Power consumption)	24 VDC (-15% to +10%) 15 W max., 0.8 A max.
Communications Specifications	RS-232C, RS-422, RS-485
Input Specifications (Input voltage) RST, TRG1, and TRG2	24 VDC (+10% to -15%, including ripple) (PNP and NPN compatible)
Output Specifications (Maximum switching capacity) RUN, BUSY/OUTS, ERROR/OUT4, OUT1, and OUT2	24 VDC (+10% to -15%, including ripple) PNP and NPN compatible
Ambient operating temperature	-10 to 55°C (with no icing)
Ambient storage temperature	-25 to 65°C (with no icing)
Ambient operating humidity	25% to 85% (with no condensation)
Insulation resistance	20 MΩ min. (at 500 VDC) applied as follows: (1) Between power supply terminals and grounded case (2) Between ground and terminals
Dielectric strength	1,000 VAC (50/60 Hz) for 1 minute (1) Between power supply terminals and grounded case (2) Between ground and terminals
Degree of protection	Panel mounted (equivalent to IP20)
Vibration resistance	10 to 150 Hz variable vibration, 0.2-mm double amplitude at 15 m/s² acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each
Shock resistance	150 m/s²
Appearance	105 × 90 × 65 mm (not including projections)
Material	Polycarbonate (PC) resin, ABS resin
Weight	Approx. 300 g
Connectable Amplifier Units	1	2

Note: For details, refer to the User's Manual (Cat. No. Z249).

USB Port

The USB port is used for a simple connection with a personal computer using a USB cable. The port complies with USB 1.1, and the USB cable uses a series A or series mini-B connector. A USB port driver must be separately provided. Consult with your OMRON representative for details.
When connected to a host device via USB, the communications will use 1:1 protocol regardless of the setting of DIP switches 3 to 9.
The USB port is not used for control purposes. When building a system, be sure to provide an RS-232C port or RS-422/RS-485C port.

ID Sensor Units

Model		CJ1W-V680C11	CJ1W-V680C12	CS1W-V680C11	CS1W-V680C12
Current consumption	Internal: 5 V	260 mA	320 mA	260 mA	320 mA
	Internal: 24 V/26 V	130 mA *	260 mA	125 mA *	-
	External: 24 V	-	-	-	360 mA
Ambient operating temperature		0 to 55°C
Ambient storage temperature		-20°C to 75°C
Ambient operating humidity		10% to 90% (with no condensation)
Insulation resistance		20 mΩ min. at 500 VDC
Dielectric strength		1,000 VAC for 1 minute
Degree of protection		Mounted in panel (IP30)
Vibration resistance		10 to 57 Hz variable vibration, 0.075-mm double amplitude and 57 to 150 Hz variable vibration at 9.8 m/s² acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each
Shock resistance		147 m/s² in X, Y, and Z directions 3 times each
Appearance		31 × 65 × 90 mm (excluding protrusions)		35 × 130 × 101 mm (excluding protrusions)

* When connected to the V680-H01: 280 mA. The V680-H01-V2 can be connected only to a 1-channel ID Sensor Unit. A 2-channel Unit cannot be used.

Functional Specifications of ID Sensor Units

Model	CJ1W-V680C11	CJ1W-V680C12	CS1W-V680C11	CS1W-V680C12
Communications control protocol	Special protocol for CS, CJ and NJ PLCs
Number of Antenna connections	1	2	1	2
Commands	Supported commands: Read, Write, Bit Set/Bit Clear, Mask Bit Write, Calculation Write, Data Fill, Data Check, Number of Writes Control, Copy (CJ1W-V680C12 and CS1W-V680C12 only), Read with Error Correction/Write with Error Correction, UID Read, and Noise Measurement. The following communications options are supported: Single trigger, Single auto, Repeat auto, FIFO trigger, FIFO repeat , Multi-access trigger, and Multi-access repeat
Data transfer quantity	2,048 bytes max. (160 bytes/scan)
Diagnostic function	(1) CPU watchdog timer (2) Communications error detection with RF Tag (3) Antenna power supply error
Monitoring/testing functions	Tag communications can be tested in Test Mode. Status is displayed by LED indicators.
Number of allocated words	10 words	20 words	10 words	20 words

Note: For details, refer to the User's Manual (Cat. No. Z271).
* Cannot be used for communications with the V680-D1KP[][].

Amplifier-integrated Controller (DeviceNet ID Slave/PROFIBUS ID Slave)

Model	V680-HAM42-DRT	V680-HAM42-PRT
Network compatibility	DeviceNet	PROFIBUS DP-V0
Connectable Antennas	One channel (V680-HS[][])
Rated voltage	24 VDC (-15% to 10%) including 10% ripple (p-p)
Power consumption	4 W max. (Current consumption of 200 mA max. at power supply voltage of 24 VDC)
Ambient operating temperature	-10 to 55°C (with no icing)
Ambient storage temperature	-25 to 65°C (with no icing)
Ambient operating humidity	25% to 85% (with no condensation; ambient operating temperature is 40°C max. at humidity of 85%)
Insulation resistance	20 MΩ min. (at 500 VDC) between all terminals excluding the ground terminal and the case
Dielectric strength	1,000 VAC (50/60 Hz) for 1 minute between all terminals excluding the ground terminal and the case
Vibration resistance	10 to 150 Hz, 0.2-mm double amplitude at 15 m/s² acceleration with 10 sweeps in X, Y and Z directions for 8 minutes each
Shock resistance	150 m/s² in X, Y, and Z directions 3 times each (18 times in total)
Appearance	65 × 65 × 65 mm (excluding protrusions)
Degree of protection	IEC 60529, IP20
Materials	Polycarbonate (PC) resin, ABS resin
Weight	Approx. 150 g
Mounting	DIN Track

Note: 1. For details, refer to the User's Manual (Cat. No. Z278).
2. The number of words allocated in the master depends on the Access Mode.

Amplifier-integrated Controllers (ID Flag Sensors)

Model	V680-HAM91	V680-HAM81
Rated voltage	24 VDC (-15% to +10%) including 10% ripple (p-p)
Power consumption	3.5 W (24 VDC, 150 mA max. except external I/O line current)
Input specifications	Transistor output Short-circuit current: 3 mA (typical) (for short-circuit between IN terminal and 0 V), OFF voltage: 15 to 30 VDC, ON voltage: 0 to 5 VDC, Input impedance: 8.2 kΩ, Applied voltage: 30 VDC max.
Output specifications	NPN open-collector output 30 VDC, 20 mA max., Residual voltage: 2 V max.	PNP open-collector output 30 VDC, 20 mA max., Residual voltage: 2 V max.
Ambient operating temperature	-10 to 55°C (with no icing)
Ambient storage temperature	-25 to 65°C (with no icing)
Ambient operating humidity	25% to 85% (with no condensation; ambient operating temperature is 40°C max. at humidity of 85%)
Insulation resistance	20 MΩ min. (at 500 VDC) between all terminals excluding the FG terminal and the case
Dielectric strength	1,000 VAC (50/60 Hz) applied for 1 minute between all terminals excluding the FG terminal and the case
Vibration resistance	10 to 150 Hz, 0.2-mm double amplitude at 15 m/s² acceleration with 10 sweeps in X, Y and Z directions for 8 minutes each
Shock resistance	150 m/s² in X, Y, and Z directions 3 times each (18 times in total)
Appearance	90 × 30 × 65 mm (excluding protrusions)
Degree of protection	IEC 60529, IP40
Materials	Polycarbonate (PC) resin, ABS resin
Weight	Approx. 130 g
Mounting	DIN Track

Note: 1. For details, refer to the User’s Manual (Cat. No. Z279).
2. The connectors are not water resistant. If there is a possibility that water will be splashed onto the ID Sensor
Unit, mount it inside of a control box. Also, be sure to use the V680 as a set with the V680-A60 Interface Cable
(sold separately).

Handheld Reader Writers

Model	V680-CHUD 0.8M	V680-CHUD 1.9M	V680-CH1D	V680-CH1D-PSI
Power supply voltage	5 VDC ± 5% (at the connector section of the product)
Current consumption	500 mA max. (for a power supply voltage of 5.0 V)
Communications specifications	USB (Series A plug) Ver.1.1		RS-232C (D-SUB 9-pin) compatible with IBM PC/AT)	RS-232C (D-SUB 9-pin)
Ambient operating temperature during ommunication	0 to +40°C
Ambient storage temperature	-25 to +65°C
Ambient operating humidity during communication	35% to 85% (with no condensation)
Insulation resistance	50 MΩ min. (at 500 VDC) between connector and case
Dielectric strength	1,000 VAC, 50/60 Hz for 1 min (leakage current: 1 mA max.) between connectors and case
Degree of protection	IEC 60529: IP63 *
Vibration resistance	Destruction: 10 to 150 Hz variable vibration, 0.2-mm double amplitude and 15 m/s² acceleration with 10 sweeps for 8 min each in 6 directions
Shock resistance	Destruction: 150 m/s², 3 times each in X, Y, and Z directions
Weight	Approx. 110 g (including connector and cable)	Approx. 140 g (including connector and cable)	Approx. 170 g (including connector and cable)	Approx. 120 g (including connector and cable)
Cable length	0.8 m	1.9 m	2.5 m	0.8 m

Note: Refer to the User’s Manual (Cat. No. Z272) for details.
Contact your OMRON sales representative for details on drivers for Windows.
* This does not include the connector section. The main unit is not resistant to chemical or oils.

AC Adapter (for V680-CH1D)

Model	V600-A22
Input voltage	100 to 120 VAC at 50/60 Hz
Input current	AC: 300 mA (at load current of 2.0 A)
Output voltage	DC5V ± 0.25V
Ambient operating temperature	0 to +40°C
Ambient storage temperature	-20 to +85°C (with no icing)
Ambient operating humidity	5% to 95% (with no condensation)
Insulation resistance	100 MΩ min. (at 500 VDC) between input terminals and output terminals
Dielectric strength	2,000 V for 1 minute between input terminals and output terminals with a current leakage of 10 mA max.
Weight	Approx. 70 g
Applicable standards	UL

last update: April 3, 2017

(Unit: mm)

Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.

RF Tag

V680-D1KP52MT/-D2KF52M

V680-D1KP53M

V680-D1KP54T

V680-D1KP66T/-D1KP66MT

V680-D1KP66T-SP

V680S-D2KF67/-D2KF67M
V680S-D8KF67/-D8KF67M

V680S-D2KF68/-D2KF68M
V680S-D8KF68/-D8KF68M

V680-D1KP58HTN

V680-D1KP52M-BT01
V680-D2KF52M-BT01

V680-D1KP52M-BT11
V680-D2KF52M-BT11

Antenna with Detachable Amplifier Unit

V680-HS52-W

V680-HS52-R

V680-HS51

V680-HS63-W

V680-HS63-R

V680-HS65-W

V680-HS65-R

Antenna with Built-in Amplifier Unit

V680-H01-V2