E2E (Small Dia) Series

Lineup of global small-diameter types (3 dia., 4 dia., 6.5 dia., M4, M5)

A lineup of unshielded models for long distance sensing is also available. Stable long distance sensing performance enables worry-free use even when the work flow is unsteady.

Bright operation indicators make it easy to check operation status

Four indictor lamps in a 360 degree layout can be easily seen.

High-speed response enables sharp detection timing

5 kHz response frequency max.

Protection circuits prevent failures due to wiring mistakes.

Load short-circuit protection and output reverse polarity protection circuits are incorporated.

Environment friendly, low current consumption only 2/3 that of previous models

All have a current consumption of 10 mA max.

Protective Stainless-steel Spiral Tube against wire breakage is available

Lineup of protective tubes for M4 and M5 sizes. Reduces wire breakage due to catching and shock.

last update: December 04, 2014

Size		3 dia.		4 dia.		5.4 dia.
Type		Shielded	Unshielded	Shielded	Unshielded	Shielded
Model		E2E- C03SR8[]	E2E- C03N02[]	E2E- C04S12[]	E2E- C04N03[]	E2E- C05S01[]
Sensing distance (at 23°C)		0.8 mm ±10%	2 mm ±10%	1.2 mm ±10%	3 mm ±10%	1mm ±10%
Setting distance *1 (Sensing distance × 0.7)		0 to 0.56 mm	0 to 1.4 mm	0 to 0.84 mm	0 to 2.1 mm	0 to 0.7 mm
Differential travel		15% max. of sensing distance
Detectable object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Catalog.)
Standard sensing object		Iron, 3 × 3 × 1 mm	Iron, 6 × 6 × 1 mm	Iron, 4 × 4 × 1 mm	Iron, 9 × 9 × 1 mm	Iron, 5.4 × 5.4 × 1 mm
*Response frequency 2**		5 kHz	3.5 kHz	4 kHz	2 kHz	4 kHz
*Power supply voltage 3**		10 to 30 VDC (including 10% ripple (p-p))
Current consumption		10 mA max.
Control output *4	Load current	50 mA max.		100 mA max.
Control output *4	Residual voltage	2 V max. *5
Indicators		Operation indicator: Yellow (complies with European standard EN60947-5-2) Lights during output.
Operation mode		B1/B2: PNP open collector, C1/C2: NPN open collector B1/C1 models: NO, B2/C2 models: NC
Protection circuits		Output reverse polarity protection, Power source circuit reverse polarity protection, Surge suppressor, Load short-circuit protection
Ambient temperature range		Operation and storage: -25 to 70°C (with no icing or condensation)
Ambient humidity range		Operation and storage: 35% to 95% (with no condensation)
Temperature influence		±15% max. of sensing distance at 23°C within temperature range of -25 to 70°C
Voltage influence		±2.5% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance		50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		500 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 500 m/s² 10 times each in X, Y, and Z directions
Degree of protection		IEC 60529 IP67, in-house standards: oil-resistant *6
Con- necting method	Pre-wired Models	Yes		Yes		Yes
	M8 Pre-wired Connector Models	Yes		Yes		No
	M8 Connector Models	No		Yes		No
Weight (packed state)	Pre-wired Models	Approx. 25 g	Approx. 30 g	Approx. 35 g	Approx. 35 g	Approx. 35 g
	M8 Pre-wired Connector Models	Approx. 20 g	Approx. 20 g	Approx. 15 g	Approx. 20 g	---
	M8 Connector Models	---	---	Approx. 10 g	Approx. 10 g	---
Materi- als	Case	SUS303 (EN 1.4305) *7				Nickelplated brass
	Sensing surface	Heat-resistant ABS
	Clamping nuts *8	No
	Toothed washer *8	No
	Cable	Polyvinyl chloride (PVC)
Acces- sories	Instruction manual	Yes
	Model label	Yes
	Mounting brackets	Sold separately

Size		6.5 dia.		M4		M5
Type		Shielded	Unshielded	Shielded	Unshielded	Shielded	Unshielded
Model		E2E- C06S02[]	E2E- C06N04[]	E2E- S04SR8[]	E2E- S04N02[]	E2E- S05S12[]	E2E- S05N03[]
Sensing distance (at 23°C)		2 mm ±10%	4 mm ±10%	0.8 mm ±10%	2 mm ±10%	1.2 mm ±10%	3 mm ±10%
Setting distance *1 (Sensing distance × 0.7)		0 to 1.4 mm	0 to 2.8 mm	0 to 0.56 mm	0 to 1.4 mm	0 to 0.84 mm	0 to 2.1 mm
Differential travel		15% max. of sensing distance
Detectable object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Catalog.)
Standard sensing object		Iron, 6.5 × 6.5 × 1 mm	Iron, 12 × 12 × 1 mm	Iron, 3 × 3 × 1 mm	Iron, 6 × 6 × 1 mm	Iron, 4 × 4 × 1 mm	Iron, 9 × 9 × 1 mm
*Response frequency 2**		3 kHz	3 kHz	5 kHz	3.5 kHz	4 kHz	2 kHz
*Power supply voltage 3**		10 to 30 VDC (including 10% ripple (p-p))
Current consumption		10 mA max.
Control output *4	Load current	200 mA max. (60 to 70°C: 100 mA)		50 mA max.		100 mA max.
Control output *4	Residual voltage	2 V max. *5
Indicators		Operation indicator: Yellow (complies with European standard EN60947-5-2) Lights during output.
Operation mode		B1/B2: PNP open collector, C1/C2: NPN open collector B1/C1 models: NO, B2/C2 models: NC
Protection circuits		Output reverse polarity protection, Power source circuit reverse polarity protection, Surge suppressor, Load short-circuit protection
Ambient temperature range		Operation and storage: -25 to 70°C (with no icing or condensation)
Ambient humidity range		Operation and storage: 35% to 95% (with no condensation)
Temperature influence		±15% max. of sensing distance at 23°C within temperature range of -25 to 70°C
Voltage influence		±2.5% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance		50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		500 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 500 m/s² 10 times each in X, Y, and Z directions
Degree of protection		IEC 60529 IP67, in-house standards: oil-resistant *6
Con- necting method	Pre-wired Models	Yes		Yes		Yes
	M8 Pre-wired Connector Models	Yes		Yes		Yes
	M8 Connector Models	Yes		No		Yes
Weight (packed state)	Pre-wired Models	Approx. 55 g	Approx. 55 g	Approx. 30 g	Approx. 30 g	Approx. 35 g	Approx. 40 g
	M8 Pre-wired Connector Models	Approx. 20 g	Approx. 25 g	Approx. 20 g	Approx. 20 g	Approx. 20 g	Approx. 20 g
	M8 Connector Models	Approx. 10 g	Approx. 15 g	---	---	Approx. 15 g	Approx. 15 g
Materi- als	Case	SUS303 (EN 1.4305) *7
	Sensing surface	Heat-resistant ABS
	Clamping nuts *8	No		SUS430 (EN 1.4016) *7
	Toothed washer *8	No		SUS303 (EN 1.4305) *7
	Cable	Polyvinyl chloride (PVC)
Acces- sories	Instruction manual	Yes
	Model label	Yes
	Mounting brackets	Sold separately

*1. Using within the set distance enables high-speed responsiveness and a more stable repeat accuracy.
*2. The response frequency is an average value.
*3. When used at a power of 12 V, the Sensor is less susceptible to the effects of internal self heat generation and therefore a more stable repeat accuracy can be obtained.
*4. When the control output is 20 mA or less, the Sensor is less susceptible to the effects of internal self heat generation and therefore a more stable repeat accuracy can be obtained.
*5. 3 dia., M4: load current 50 mA, cable length 2 m 4 dia., 5.4 dia., M5: load current 100 mA, cable length 2 m 6.5 dia.: load current 200 mA, cord length 2 m
*6. Oil resistance in-house standard: Performance with respect to water insoluble oil. (Test at right)
*7. Material name in EN standards.
*8. Clamping nuts: 2 pieces, toothed washer: 1 piece

Oil resistance test

After the test time elapses, the characteristics below are checked for problems.
(1) Visual appearance (no damage that affects product characteristics)
(2) Operation check (ON/OFF)
(3) Insulation resistance (50 MΩ min. at 500 VDC)
(4) Dielectric strength (500 VAC, 1 min.)
(5) Water resistance (IP67)

last update: December 04, 2014

(Unit: mm)

Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.