Omron, E3JK Series

• Long sensing distance that is approximately 8 times that of our conventional model (for the Through-beam and Diffuse-reflective models).

　(Through-beam: 40m, Retro-reflective: 7m, and Diffuse-reflective: 2.5m.)

• Improved visibility:

• A red LED that makes the spot visible.

• Large indicators that can be seen even from a distance.

• Improved operability.

　(Enlarged sensitivity adjuster and operation selector)

• Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).

　(Additional types added to the DC type lineup.)

• Models with infrared LEDs are also available.

last update: May 11, 2015

last update: October 28, 2015

Sensing method		Through-beam
Model		E3JK-TR11-[]	E3JK-TR12-[]	E3JK-TR13-[]	E3JK-TR14-[]
Sensing distance		40 m	5 m	40 m	5 m
Standard sensing object		Opaque: 17-mm dia. min.
Differential travel		-
Directional angle		Both Emitter and Receiver 3° min.
Light source (wavelength)		Red LED (624 nm)		Infrared LED (850 nm)
Power supply voltage		24 to 240 VDC ±10%, ripple (p-p): 10% max. 24 to 240 VAC ±10%, 50/60 Hz
Power consumption	DC	3 W max. (Emitter 1.5 W max. Receiver 1.5 W max.)
Power consumption	AC	3 W max. (Emitter 1.5 W max. Receiver 1.5 W max.)
Control output		Relay output SPDT, 250 VAC, 3 A max. (cosϕ= 1), 5 VDC, 10 mA min., Light-ON/Dark-ON selectable
Protection circuits		-
Life expectancy (relay output)	Mechanical	50,000,000 times min. (switching frequency: 18,000 times/h)
Life expectancy (relay output)	Electrical	100,000 times min. (switching frequency: 1,800 times/h)
Response time		20 ms max.
Sensitivity adjustment		One-turn adjuster Receiver (E3JK-TR1[]-D) only
Ambient illumination (Receiver side)		Incandescent lamp: 3,000 lx max., Sunlight: 11,000 lx max.
Ambient temperature range		Operating: -25°C to 55°C, Storage: -40°C to 70°C (with no icing or condensation)
Ambient humidity range		Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance		20 MΩ min. at 500 VDC
Dielectric strength		1,500 VAC, 50/60 Hz for 1 min
Vibration resistance	Destruction	10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Vibration resistance	Malfunction	10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	Destruction	500 m/s² for 3 times each in X, Y, and Z directions
Shock resistance	Malfunction	100 m/s² for 3 times each in X, Y, and Z directions
Degree of protection		IEC 60529 IP64
Connection method		Pre-wired (standard length: 2 m)
Weight (packed state)		Approx. 350 g
Material	Case	ABS (Acrylonitrile Butadiene Styrene)
	Lens/Display window	Methacrylic resin
	Adjuster	POM
	Cable	PVC
Bending radius of cable		R18
Accessories		Instruction manual and Mounting Bracket (E3JK-TR1[]-C only)

Sensing method		Retro-reflective (without MSR function)		Retro-reflective (with MSR function)
Model		E3JK-RR11-[]	E3JK-RR13-[]	E3JK-RR12-[]
Sensing distance		7 m [100 mm]* (When using E39-R1), 11 m [100 mm]* (When using E39-R2)		6 m [100 mm]* (When using E39-R1), 10 m [100 mm]* (When using E39-R2)
Standard sensing object		Opaque: 75-mm dia. min. (When using E39-R1), Opaque: 100-mm dia. min. (When using E39-R2)
Differential travel		-
Directional angle		1.5° min.
Light source (wavelength)		Red LED (624 nm)	Infrared LED (850 nm)	Red LED (624 nm)
Power supply voltage		24 to 240 VDC ±10%, ripple (p-p): 10% max. 24 to 240 VAC ±10%, 50/60 Hz
Power consumption	DC	2 W max.
Power consumption	AC	2 W max.
Control output		Relay output SPDT, 250 VAC, 3 A max. (cosϕ= 1), 5 VDC, 10 mA min., Light-ON/Dark-ON selectable
Protection circuits		Mutual interference prevention function
Life expectancy (relay output)	Mechanical	50,000,000 times min. (switching frequency: 18,000 times/h)
Life expectancy (relay output)	Electrical	100,000 times min. (switching frequency: 1,800 times/h)
Response time		20 ms max.
Sensitivity adjustment		One-turn adjuster
Ambient illumination (Receiver side)		Incandescent lamp: 3,000 lx max., Sunlight: 11,000 lx max.
Ambient temperature range		Operating: -25°C to 55°C, Storage: -40°C to 70°C (with no icing or condensation)
Ambient humidity range		Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance		20 MΩ min. at 500 VDC
Dielectric strength		1,500 VAC, 50/60 Hz for 1 min
Vibration resistance	Destruction	10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Vibration resistance	Malfunction	10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	Destruction	500 m/s² for 3 times each in X, Y, and Z directions
Shock resistance	Malfunction	100 m/s² for 3 times each in X, Y, and Z directions
Degree of protection		IEC 60529 IP64
Connection method		Pre-wired (standard length: 2 m)
Weight (packed state)		Approx. 180 g
Material	Case	ABS (Acrylonitrile Butadiene Styrene)
	Lens/Display window	Methacrylic resin
	Adjuster	POM
	Cable	PVC
Bending radius of cable		R18
Accessories		Instruction manual, Mounting Bracket (E3JK-RR1[]-C only), and Reflector (E3JK- RR1[]-C only)

*Values in parentheses indicate the minimum required distances between the Sensors and Reflectors.

Sensing method		Diffuse-reflective
Model		E3JK-DR11-[]	E3JK-DR12-[]	E3JK-DR13-[]	E3JK-DR14-[]
Sensing distance		White paper (300 × 300 mm): 2.5 m	White paper (100 × 100 mm): 300 mm	White paper (300 × 300 mm): 2.5 m	White paper (100 × 100 mm): 300 mm
Standard sensing object		-
Differential travel		20% max. of sensing distance
Directional angle		-
Light source (wavelength)		Red LED (624 nm)		Infrared LED (850 nm)
Power supply voltage		24 to 240 VDC ±10%, ripple (p-p): 10% max. 24 to 240 VAC ±10%, 50/60 Hz
Power consumption	DC	2 W max.
Power consumption	AC	2 W max.
Control output		Relay output SPDT, 250 VAC, 3 A max. (cosϕ= 1), 5 VDC, 10 mA min., Light-ON/Dark-ON selectable
Protection circuits		Mutual interference prevention function
Life expectancy (relay output)	Mechanical	50,000,000 times min. (switching frequency: 18,000 times/h)
Life expectancy (relay output)	Electrical	100,000 times min. (switching frequency: 1,800 times/h)
Response time		20 ms max.
Sensitivity adjustment		One-turn adjuster
Ambient illumination (Receiver side)		Incandescent lamp: 3,000 lx max., Sunlight: 11,000 lx max.
Ambient temperature range		Operating: -25°C to 55°C, Storage: -40°C to 70°C (with no icing or condensation)
Ambient humidity range		Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance		20 MΩ min. at 500 VDC
Dielectric strength		1,500 VAC, 50/60 Hz for 1 min
Vibration resistance	Destruction	10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Vibration resistance	Malfunction	10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	Destruction	500 m/s² for 3 times each in X, Y, and Z directions
Shock resistance	Malfunction	100 m/s² for 3 times each in X, Y, and Z directions
Degree of protection		IEC 60529 IP64
Connection method		Pre-wired (standard length: 2 m)
Weight (packed state)		Approx. 180 g
Material	Case	ABS (Acrylonitrile Butadiene Styrene)
	Lens/Display window	Methacrylic resin
	Adjuster	POM
	Cable	PVC
Bending radius of cable		R18
Accessories		Instruction manual and Mounting Bracket (E3JK-DR1[]-C only)

Sensing method		Through-beam
Model	NPN output	E3JK-TN11	E3JK-TN12	E3JK-TN13	E3JK-TN14
Model	PNP output	E3JK-TP11	E3JK-TP12	E3JK-TP13	E3JK-TP14
Sensing distance		40 m	5 m	40 m	5 m
Standard sensing object		Opaque: 17-mm dia. min.
Differential travel		-
Directional angle		Both Emitter and Receiver 3° min.
Light source (wavelength)		Red LED (624 nm)		Infrared LED (850 nm)
Power supply voltage		10 to 30 VDC, including ripple (p-p): 10%
Power consumption	DC	40 mA max. (Emitter 25 mA max. Receiver 15 mA max.)
Power consumption	AC	-
Control output		Load power supply voltage: 30 V max., Load current: 100 mA max., Residual voltage: 3 V max., open-collector output (NPN/PNP output depending on model), Light-ON/Dark-ON selectable
Protection circuits		Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection
Life expectancy (relay output)	Mechanical	-
Life expectancy (relay output)	Electrical	-
Response time		1 ms max.
Sensitivity adjustment		One-turn adjuster Receiver (E3JK-T[][][]-D) only
Ambient illumination (Receiver side)		Incandescent lamp: 3,000 lx max., Sunlight: 11,000 lx max.
Ambient temperature range		Operating: -25°C to 55°C, Storage: -40°C to 70°C (with no icing or condensation)
Ambient humidity range		Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance		20 MΩ min. at 500 VDC
Dielectric strength		1,500 VAC, 50/60 Hz for 1 min
Vibration resistance	Destruction	10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Vibration resistance	Malfunction	10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	Destruction	500 m/s² for 3 times each in X, Y, and Z directions
Shock resistance	Malfunction	500 m/s² for 3 times each in X, Y, and Z directions
Degree of protection		IEC 60529 IP64
Connection method		Pre-wired (standard length: 2 m)
Weight (packed state)		Approx. 300 g
Material	Case	ABS (Acrylonitrile Butadiene Styrene)
	Lens/Display window	Methacrylic resin
	Adjuster	POM
	Cable	PVC
Bending radius of cable		R18
Accessories		Instruction manual

Sensing method		Retro-reflective (without MSR function)		Retro-reflective (with MSR function)
Model	NPN output	E3JK-RN11	E3JK-RN13	E3JK-RN12
Model	PNP output	E3JK-RP11	E3JK-RP13	E3JK-RP12
Sensing distance		7 m [100 mm]* (When using E39-R1), 11 m [100 mm]* (When using E39-R2)		6 m [100 mm]* (When using E39-R1), 10 m [100 mm]* (When using E39-R2)
Standard sensing object		Opaque: 75-mm dia. min.
Differential travel		-
Directional angle		1.5° min.
Light source (wavelength)		Red LED (624 nm)	Infrared LED (850 nm)	Red LED (624 nm)
Power supply voltage		10 to 30 VDC, including ripple (p-p): 10%
Power consumption	DC	30 mA max.
Power consumption	AC	-
Control output		Load power supply voltage: 30 V max., Load current: 100 mA max., Residual voltage: 3 V max., opencollector output (NPN/PNP output depending on model), Light-ON/Dark-ON selectable
Protection circuits		Power supply reverse polarity protection, Output short-circuit protection, Mutual interference prevention function, and Output reverse polarity protection
Life expectancy (relay output)	Mechanical	-
Life expectancy (relay output)	Electrical	-
Response time		1 ms max.
Sensitivity adjustment		One-turn adjuster
Ambient illumination (Receiver side)		Incandescent lamp: 3,000 lx max., Sunlight: 11,000 lx max.
Ambient temperature range		Operating: -25°C to 55°C, Storage: -40°C to 70°C (with no icing or condensation)
Ambient humidity range		Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance		20 MΩ min. at 500 VDC
Dielectric strength		1,500 VAC, 50/60 Hz for 1 min
Vibration resistance	Destruction	10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Vibration resistance	Malfunction	10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	Destruction	500 m/s² for 3 times each in X, Y, and Z directions
Shock resistance	Malfunction	500 m/s² for 3 times each in X, Y, and Z directions
Degree of protection		IEC 60529 IP64
Connection method		Pre-wired (standard length: 2 m)
Weight (packed state)		Approx. 160 g
Material	Case	ABS (Acrylonitrile Butadiene Styrene)
	Lens/Display window	Methacrylic resin
	Adjuster	POM
	Cable	PVC
Bending radius of cable		R18
Accessories		Instruction manual

*Values in parentheses indicate the minimum required distances between the Sensors and Reflectors.

Sensing method		Diffuse-reflective
Model	NPN output	E3JK-DN11	E3JK-DN12	E3JK-DN13	E3JK-DN14
Model	PNP output	E3JK-DP11	E3JK-DP12	E3JK-DP13	E3JK-DP14
Sensing distance		White paper (300 × 300 mm): 2.5 m	White paper (100 × 100 mm): 300 mm	White paper (300 × 300 mm): 2.5 m	White paper (100 × 100 mm): 300 mm
Standard sensing object		-
Differential travel		20% max. of sensing distance
Directional angle		-
Light source (wavelength)		Red LED (624 nm)		Infrared LED (850 nm)
Power supply voltage		10 to 30 VDC, including ripple (p-p): 10%
Power consumption	DC	30 mA max.
Power consumption	AC	-
Control output		Load power supply voltage: 30 V max., Load current: 100 mA max., Residual voltage: 3 V max., opencollector output (NPN/PNP output depending on model), Light-ON/Dark-ON selectable
Protection circuits		Power supply reverse polarity protection, Output short-circuit protection, Mutual interference prevention function, and Output reverse polarity protection
Life expectancy (relay output)	Mechanical	-
Life expectancy (relay output)	Electrical	-
Response time		1 ms max.
Sensitivity adjustment		One-turn adjuster
Ambient illumination (Receiver side)		Incandescent lamp: 3,000 lx max., Sunlight: 11,000 lx max.
Ambient temperature range		Operating: -25°C to 55°C, Storage: -40°C to 70°C (with no icing or condensation)
Ambient humidity range		Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance		20 MΩ min. at 500 VDC
Dielectric strength		1,500 VAC, 50/60 Hz for 1 min
Vibration resistance	Destruction	10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Vibration resistance	Malfunction	10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	Destruction	500 m/s² for 3 times each in X, Y, and Z directions
Shock resistance	Malfunction	500 m/s² for 3 times each in X, Y, and Z directions
Degree of protection		IEC 60529 IP64
Connection method		Pre-wired (standard length: 2 m)
Weight (packed state)		Approx. 160 g
Material	Case	ABS (Acrylonitrile Butadiene Styrene)
	Lens/Display window	Methacrylic resin
	Adjuster	POM
	Cable	PVC
Bending radius of cable		R18
Accessories		Instruction manual

last update: October 28, 2015

Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.

Sensors

Through-beam
E3JK-T[]1[]

＜Emitter＞
E3JK-T[]1[]-L

＜Receiver＞
E3JK-T[]1[]-D

Retro-reflective/Diffuse-reflective
E3JK-R[]1[]
E3JK-D[]1[]

Accessories

Mounting Bracket (Order separately)

Mounting Bracket
E39-L40

With Mounting Bracket Attached

Reflector (Order separately)

E39-R1
E39-R1S

Material:
Reflective surface: acrylic
Rear surface: ABS

E39-R2

Material:
Reflective surface: acrylic
Rear surface: ABS

TITLE	DOCUMENT TYPE	SIZE
E3JK (NEW)	Catalog	6206 KB
E3JK-[][][][] Photoelectric Sensor(ENG/JPN/CHI/KOR)	Manual	5779 KB
E3JK-T[][][] Photoelectric Sensor(ENG/CHI)	Manual	1114 KB