Compact Industrial SCARA
Compact Industrial Robot with light weight space saving arm. Its high speed operation is best suited for pick and place, labelling, tracking
Rated power supply | Wide range from 12 to 24 VDC | |
---|---|---|
Allowable voltage fluctuation range | 90% to 110% of rated voltage | |
Current consumption (per display) |
Red LED: 60 mA max. (at 24 VDC), 100 mA max. (at 12 VDC) Green LED: 80 mA max. (at 24 VDC), 140 mA max. (at 12 VDC) |
|
Input level | Negative logic |
High: 4 V to power supply voltage Low: 0 to 1.5 V |
Ambient temperature |
Operating: -10 to 55°C (with no icing) Storage: -25 to 70°C (with no icing) |
|
Ambient humidity | Operating: 35% to 85% (with no condensation) |
Insulation resistance | 100 MΩ min. (at 500 VDC) between each terminal and mounting panel |
---|---|
Dielectric strength | 500 VAC, 50/60 Hz for 1 min between each terminal and mounting panel |
Noise immunity (See note 2.) |
Power terminal: ±500 V Input terminals: ±500 V (normal mode), ±1,500 V (common mode) |
Vibration resistance | Destruction: 10 to 55 Hz, 0.75-mm double amplitude |
Shock resistance | Destruction: 300 m/s2 |
Degree of protection | IEC IP40 (portion on panel surface) |
Compatible connector | OMRON NRT-C/NRT-CN/NRT-CP |
Note: 1. Initial values
2. Impulse conditions:
Rise time: 1 ns +10% max.
ulse width: 100 ns, 1 μs.
Polarity: Positive, negative, asynchronous to power frequency, 100-Hz repeat frequency.
• A face plate is used with the Unit Display Unit, which incorporates a surface-lighting LED.
• The following face plates are available.
• Custom face plates can be made. Refer to the following for the procedure.
(Unit: mm)
TITLE | DOCUMENT TYPE | SIZE |
M7E (25 mm) | Catalog | 1323 KB |
---|