Omron, MX-Z2000H Series
Laser Markers
MX-Z2000H Series
Great for either deep or shallow engraving in metals, marking on plastics/resins or plastic films, and for fine processing. Mark anything from electronic parts to automotive parts.

[High Speed and High Quality in a Wide Variety of Applications] Marking Flexibility

Two Operating Modes Provide Fine Detail to Deep Engraving

Standard Mode

Our exclusive flexible pulse control (up to 1MHz, adjustable 1 - 20 pulses) enables optimum marking and processing for a variety of materials and applications, for a variety of materials and applications, including both heated and non-heated marking/processing, etc.

MX-Z2000H Series Features 3

[NEW] Optional EE Mode (Energy Enhanced Mode)

Deep engraving of metal. rough polishing, and other energy-intense processing becomes possible with an expanded and enhanced flexible pulse control, which provides pulse streams of up to 30 pulses.

MX-Z2000H Series Features 4

Marking 3D Objects Is Simple Even on Cones and Spheres

[NEW] High-precision Z-axis Flexibility

Clean marking is now possible for 3D surfaces, such as stepped, sloped, curved, conical and spherical surfaces without any additional software.

MX-Z2000H Series Features 6

Mark Clearly and Cleanly Even at High Speed


G-DAC stands for the OMRON-developed Galvano Dynamic Acceleration Control.

The G-DAC feature adjusts the laser marking speed for optimum performance, based on the marking details.
This speed flexibility enables high-speed, clean marking.

MX-Z2000H Series Features 9

Note: G-DAC performance depends on the application. Be sure to test your application in advance.

[Enhanced Functionality Improves Productivity] Connectivity & Traceability

Position-correction without the need of a PLC

[NEW] Direct Finder Link

The MX-Z2000H series enables direct connectivity between the image processing system and the laser marker that traditionally required PLC processing . This means, there is no need for a PLC to do the linking between the vision system and the laser marker.

MX-Z2000H Series Features 13

1. The optional finder feature is required to use this function.
2. As the end of April 2017, corresponding image processing system is OMRON FH series and part of FQ2 series.
Please refer to finder option catalogue Q255-E1 to select image processing system.

Example Application

To mark a product in the same area everytime, an image processing system measures the position reference, transfers the position coordinates and the laser marker adjusts itself to mark in the correct place. After the laser marking is completed, the image processing system can also read a 2D code or any other inspection of the data or images just marked on the product.

MX-Z2000H Series Features 14

Easily Configure a Traceability System

[NEW] Traceability Log

Archive marking data, and other data to a log, etc. Simplify both traceability and preventive maintenance.

MX-Z2000H Series Features 16

Smoothly Integrate External Control

[NEW] EtherNet/IP™ Compatibility

The MX-Z2000H series is compatible with various kinds of external control. Built-in I/O connections, RS-232C, Ethernet, and EtherNet/IP™ simplify programming to control the system from a PLC.

*Please check the user's manual before using available functions and commands.

MX-Z2000H Series Features 18

Marking for Small Lots with Multiple Variants

Data can be shared with external storage

The MX-Z2000H series can access and marking data that is stored on an Ethernet server to keep up with the tremendous amount of data used for multi-variant, small lot productions. This simplifies the switching of marking data for each variant.

MX-Z2000H Series Features 20

[Withstands Severe Conditions and Meets International Standards] Durability/Safety

Stable Operation Even in Dusty/Wet Environments

[NEW] Durable IP65 Head

The laser head (where the laser light is emitted) has a double glass cover to keep dust and moisture away and ensure air-tightness.

MX-Z2000H Series Features 23

Meets Safety Requirements and Standards

[NEW] Built-in Safety Relay Circuit

When building a product to meet the ISO 13849-1 (JIS-B9705-1) criteria, you have to provide safety measures for the total device in which the laser marker is installed. The MX-Z2000H series has 2 safety relays in the controller, and sending an emergency stop signal from an external controller to the interlock terminals will absolutely stop the power supply to the laser.

MX-Z2000H Series Features 25

[NEW] Meets International Standards and Regulations

The laser markers meet each standard and regulation. They can now be used internationally.
Note: For details about exact countries and areas, contact your local OMRON representative.

Operation Flexibility Increases Throughput With Less Effort

Edit the Marking Data Directly on the Laser Marker

Editing Data

There is no need to buy separate editing software, or a computer to edit data. Data editing functionality is built right into the laser marker itself, simplifying the process.

MX-Z2000H Series Features 29

Offline Editing Software is Also Standard

You can also use a separate computer if you choose, to create and edit the print data, including graphics, with the same functionality as is built into the laser marker.

MX-Z2000H Series Features 30

Simplifying Positioning and Other Floor Work

Optional Features

Finder (Vision Attachment)

The Finder feature enables visual positioning of small parts for marking/processing, as well as automated positioning and inspection with an image processing system.

Please refer to the catalogue Q255-E1

MX-Z2000H Series Features 33
MX-Z2000H Series Features 34

Recently Viewed
MicroHawk Barcode Readers
4 models: ID-20, ID-30, ID-40 & ID-45 New! UHD lens with auto focus reads smallest possible codes read any code on any surface highly customizable hardware options world's smallest industrial barcode readers world's first web-based barcode reader - WebLink
Triple Sensing Stainless Steel Inductive Sensors
UNI-Body SS-303 M8, M12, M18 Stainless Steel Proximity Sensor with triple sensing distance. Available in NPN and PNP output, Chemical Resistant with M8, M12 connector
3 in 1 - Reader, Amplifier & Controller
Easy to use RFID system for identification of large objects like cars. It can easily detect objects of various heights. Focus mode helps to detect only the target tag and ignores nearby tags on the pallets and other objects.
Related Products