Omron, G3J-T-C Series

• Limiting the starting current saves energy.

• Certified for UL and CSA.

• Mounts with screws or to DIN Track.

• Compact design with heat sinks (3.7-kW models: 100 × 100 × 130 mm (W × H × D)).

• Built-in snubber circuit and thyristor.

• Built-in operation indicator.

Certified Standards

UL 508, CSA 22.2 No. 14

Ratings (at an Ambient Temperature of 25°C)

Power Supply

Operating input power supply specifications	AC Model	DC Model
Rated power supply voltage	100 to 240 VAC	12 to 24 VDC
Operating voltage range	85 to 264 VAC	10.2 to 26.4 VDC
Current consumption	40 mA max. (at 100 to 240 VAC)	70 mA max. (at 12 to 24 VDC)

Operating (Input) Circuit

AC Model

Input method	No-voltage input	Short-circuiting/opening terminals 3 and 1 or terminals 3 and 2 SSR input short-circuited: Maximum impedance of 1 kΩ , Maximum residual voltage of 1 V SSR input open: Minimum impedance of 100 kΩ Relay input: For minute signals

DC Model

Input current		10 mA max. (at 12 to 24 VDC)
Input method	No-voltage input	Short-circuiting/opening terminals 3 and 1 or terminals 3 and 2 SSR input turned ON: Maximum residual voltage of 2 V between short-circuited terminals SSR input turned OFF: Maximum leakage current of 0.15 mA Relay input: For minute signals

Main Circuit (for Both AC and DC Models)

Model		G3J-T217BL-C	G3J-T211BL-C	G3J-T205BL-C
Rated load voltage		200 to 240 VAC
Rated voltage range		180 to 264 VAC
*Rated carry current 1**		17.4 A (at 40 °C)	11.1 A (at 40 °C)	4.8 A (at 40 °C)
Minimum load current		0.5 A
Inrush current resistance (peak value)		500 A (60 Hz, 1 cycle)	350 A (60 Hz, 1 cycle)	150 A (60 Hz, 1 cycle)
Overload resistance		Refer to Engineering Data on Catalog.
Closed current (effective value)	AC3	174 A	111 A	48 A
Closed current (effective value)	AC4	208.8 A	133.2 A	57.6 A
Breaking current (effective value)	AC3	139.2 A	88.8 A	38.4 A
Breaking current (effective value)	AC4	174 A	111 A	48 A
Applicable load	3-phase inductive motor *2 (AC3, AC4, AC53-a)	200 to 220 VAC 3.7 kW (17.4 A)	200 to 220 VAC 2.2 kW (11.1 A)	200 to 220 VAC 0.75 kW (4.8 A)
Applicable load	*Resistive load (AC1) 3**	200 to 240 VAC, 17.4 A	200 to 240 VAC, 11.1 A	200 to 240 VAC, 4.8 A

*1. The rated carry load depends on the ambient temperature. For details, refer to the Load Current vs. Ambient Temperature graph in Engineering Data.
*2. Satisfies switching test conditions of AC3, AC4, and AC53-a. (Refer to Engineering Data on Data Sheet for the test conditions.)
*3. Single-phase loads cannot be used.

Monitor Output

Operating input power supply specifications	AC model	DC model
Rated power supply voltage	100 to 240 VAC	12 to 24 VDC
Operating voltage range	85 to 264 VAC	10.2 to 26.4 VDC
Rated carry current	50 mA	0.2 A
Minimum load current	3 mA	3 mA

Characteristics (for Both AC and DC Models)

Model	G3J-T217BL-C	G3J-T211BL-C	G3J-T205BL-C
Ramp-up time	Set within a range of approx. 1 to 25 s.
Ramp-down time	Set within a range of approx. 1 to 25 s.
*Starting torque 1**	Set within a range of 200% to 450% In.
*Monitor output operate time 2**	After control signal input: AC model: 300 ms max. (TYP 50 ms), DC model: 50 ms max.
*Monitor output release time 2**	After ramp-down time completion (after main circuit current turns OFF): 60 ms max.
Output ON voltage drop (main circuit)	1.6 V (RMS) max.
Output ON voltage drop (monitor output)	AC model: 3.5 VAC max., DC model: 2.0 VDC max.
Leakage current (main circuit)	10 mA max. (at 200 VAC)
Leakage current (monitor output)	AC model: 1.5 mA max. (at 200 VAC), DC model: 0.15 mA max. (at 24 VDC)
Insulation resistance	100 MΩ min. (at 500 VDC)
Dielectric strength	2,500 VAC, 60 Hz for 1 min
Vibration resistance	10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Shock resistance	294 m/s²
Storage temperature	- 30 to 70 °C (with no icing or condensation)
Ambient operating temperature	- 20 to 60 °C (with no icing or condensation)
Ambient operating humidity	45 to 85 %
Weight	Approx. 890 g	Approx. 760 g	Approx. 760 g

*1. Provided that the starting torque is 600% In when the motor is started at full voltage.
*2. The monitor output will be ON while load current is flowing to the main circuit.

G3J-T205BL-C
G3J-T211BL-C

G3J-T217BL-C

TITLE	DOCUMENT TYPE	SIZE
G3J-T-C	Catalog	883 KB
Safety Precautions for the G3J-T-C, G3J-T, G3J-S, and G3J	Catalog	300 KB
Relay Defects Causes & Solutions (SSR Edition)	Technical Guide	6806 KB
Solid State Contactor(ENG/JPN)	Instruction Manual	10633 KB

Certified Standards

Ratings (at an Ambient Temperature of 25°C)

Power Supply

Operating (Input) Circuit

AC Model

DC Model

Main Circuit (for Both AC and DC Models)

Monitor Output

Characteristics (for Both AC and DC Models)

G3J-T205BL-C
G3J-T211BL-C

G3J-T217BL-C

Group Sites

Our Partner Sites

Subscribe Our Newsletter

Certified Standards

Ratings (at an Ambient Temperature of 25°C)

Power Supply

Operating (Input) Circuit

AC Model

DC Model

Main Circuit (for Both AC and DC Models)

Monitor Output

Characteristics (for Both AC and DC Models)

G3J-T205BL-C G3J-T211BL-C

G3J-T217BL-C

G3J-T205BL-C
G3J-T211BL-C