G3J-S Series

• The soft-start function allows a smooth startup of motors by holding down the starting current, and functions like an inverter.

• Comply with UL, CSA, IEC, and JEM requirements.

• Mount with screws or to DIN tracks.

• Compact monoblock construction (W: 80 × H: 100 × D: 100 mm) with a heat sink.

• Snubber circuit and varistor are built-in.

• Operation indicator.

Input current	10 mA max. (at 12 to 24 VDC)
Input method No-voltage input (short-circuiting and opening inputs) (See note.)	Short-circuiting or opening terminals 1 and COM or 2 (+) and 1 SSR input turned ON: A maximum residual voltage of 2 V between short-circuited terminals SSR input turned OFF: A maximum leakage current of 0.15 mA Relay input: For minute signals

Note: Refer to Safety Precautions for the G3J-T, G3J-S, and G3J.

Item		G3J-S405BL	G3J-S403BL	G3J-S211BL	G3J-S205BL
Rated load voltage		200 to 400 VAC (50/60 Hz)		200 to 240 VAC (50/60 Hz)
Load voltage range		180 to 440 VAC (50/60 Hz)		180 to 264 VAC (50/60 Hz)
Rated carry current		5.5 A (Ta = 40°C)	2.4 A (Ta = 40°C)	11.1 A (Ta = 40°C)	4.8 A (Ta = 40°C)
Min. load current		0.5 A
Peak-value current resistivity		220 A, 60 Hz, 1 cycle	96 A, 60 Hz, 1 cycle	350 A, 60 Hz, 1 cycle	150 A, 60 Hz, 1 cycle
Overload resistance		Refer to Iengneering data on Datasheet.
Closed current (effective value)	AC3	55 A	24 A	111 A	48 A
Closed current (effective value)	AC4	66 A	28.8 A	133.2 A	57.6 A
Breaking current (effective value)	AC3	44 A	19.2 A	88.8 A	38.4 A
Breaking current (effective value)	AC4	55 A	24 A	111 A	48 A
Applicable load	3-phase inductive motor (AC3 AC4 AC53-a)	380 to 400 VAC, 2.2 kW, 5.5 A	380 to 400 VAC, 0.75 kW, 2.4 A	200 to 220 VAC, 2.2 kW, 11.1 A	200 to 220 VAC, 0.75 kW, 4.8 A
	3-phase inductive motor (AC3 AC4 AC53-a)	Motors passing the AC3-class, AC4-class, and AC53-a-class switching frequency test (Ta = 40°C) under conditions specified by OMRON.
	Resistive load (AC1) (See note.)	200 to 400 VAC, 5.5 A	200 to 400 VAC, 2.4 A	200 to 240 VAC, 11.1 A	200 to 240 VAC, 4.8 A

Note: No single-phase load can be connected.

Ambient temperature
Item	G3J-S405BL	G3J-S403BL	G3J-S211BL	G3J-S205BL
Ramp-up time	Set within a range from 1 to 25 s.
Reset time	5/6 cycles of load power supply + 1 ms max.
Starting torque	Set within a range from 200% to 450% In.
Output ON-voltage drop	1.8 VRMS max.		1.6 VRMS max.
Leakage current	20 mA max. (at 400 VAC)		10 mA max. (at 200 VAC)
Insulation resistance	100 MΩ min. (at 500 VDC)
Dielectric strength	2,500 VAC, 50/60 Hz for 1 min
Vibration resistance	Destruction: 10 to 55 to 10 Hz, 0.75-mm single amplitude
Shock resistance	Destruction: 294 m/s²
Ambient temperature	Operating: -20°C to 60°C (with no icing or condensation) Storage: -30°C to 70°C (with no icing or condensation)
Ambient humidity	Operating: 45% to 85%
Weight	730 g max.
Certified standards	UL508 File No. E64562 CSA 22.2 No. 14 File No. LR35535 IEC947-4-1 File No. 96.2597.02


EMC	Emission AC mains IEC947-4-2, CISPR 11 Class A Emission Electromagnetic IEC947-4-2, CISPR 11 Class A Immunity ESD IEC947-4-2, IEC801-2: 4 kV contact discharge 8 kV air discharge Immunity Electromagnetic IEC947-4-2, IEC1000-4-3 10 V/m (80 MHz to 1 GHz) Immunity EFT IEC947-4-2, IEC801-4: 2 kV AC power-signal line Immunity Surge transient IEC947-4-2, IEC1000-4-5 1 kV differential mode 2 kV common mode Immunity RF disturbance IEC947-4-2, IEC/DIS1000-4-6 10 V (0.15 to 80 MHz)

TITLE	DOCUMENT TYPE	SIZE
G3J-S	Catalog	281 KB
Information Common to the G3J-T, G3J-S, and G3J	Catalog	1498 KB
Safety Precautions for the G3J-T-C, G3J-T, G3J-S, and G3J	Catalog	300 KB
G3J-S/-T Solid-state Contactor	Manual	583 KB
Relay Defects Causes & Solutions (SSR Edition)	Technical Guide	6806 KB
G3J-T, G3J-S, G3J Solid State Contactor(ENG/JPN)	Instruction Manual	14265 KB