Omron, G2RV-ST

New Value for Control Panels

"Control Panels: The Heart of Manufacturing Sites.
Evolution in control panels results in large evolution in production facilities.
And if control panel design, control panel manufacturing processes, and human interaction with them are innovated, control panel manufacturing becomes simpler and takes a leap forward."

Innovation for Control Panels Building with Value Design

Our shared concept for the specifications of products used in control panels,
" Value Design for Panel " (herein after referred toas Value Design)
will create new value to our customer’s Combining multiple products that share the Value Design concept will further increase the value provided to control panels.

Save more space in your panel with our new slim I/O relay

Save more space in your panel with our new slim I/O relay

Saving Space and More-advanced Control Panels

The interface wiring system of the smallest size industry＊1 help delivering more compact control panels with additional functionality.

Replace existing relays with 6.2 mm-wide relays to use space effectively

By replacing existing relays, you can downsize your control panel and enhance your equipment while maintaining its size.

Unified height reduces dead space and downsizes control panels

Our Value Design for Panel relays and their sockets are of the same height.

Shortening Lead Time for Control Panel Building

Unique product specifications let you shorten the entire process for building control panels.

Push-In Plus technology requires only a single step, greatly reducing wiring work

Larger wire terminal opening contributes to efficiency of wiring and standardization of wires

Wiring holes are wide in diameter and are structured diagonally to allow for better visibility and easy insertion, and support standard 2.5 mm² ferrule terminals.

PLC interface unit and short bars further reduce wiring effort

Our extensive lineup of accessories for reducing wiring allows for less wiring work and therefore less effort.

No need for retightening, even when vibration is applied on terminals

The pressure of the clamp spring holds the ferrule or wire securely with Push-In Plus technology, eliminating worries about screws loosening or disconnection due to vibration.

Reducing the burden of building, operating, and maintaining control panels

Made to be less taxing on the health of those who build control panels and more useful to on-site users.

Installation friendly assembly/wiring with less burden on worker's health

Push-In Plus technology with reliability and ease of insertion

OMRON’s Push-In Plus technology is as easy as inserting to an earphone jack.
This reduces the load on workers fingers.

Even though less insertion force is required, the wires are held firmly in place by a unique spring structure that ensures reliability.

＊1. In the case that a cable diameter is AWG20, 0.5 mm²
＊2. OMRON's actual measurement value data.

Easy-to-install accessories

Short bars and insulation plates can be cut or removed with little force to deliver stress-free workability.

Extra support is provided through an enhanced mounting system

Work efficiency is enhanced by DIN rail sliding performance and short bar improvements.

Easier Maintenance

Visibility is enhanced by the LED release lever

Visibility from the front is improved by a structure where the actual release lever lights and by expanding the light emission area.

Color coded stoppers indicate the voltage type

Voltage systems are color-coded for easy checking.

Use insulation plates to prevent electrical shock and separation of groups easier

You can attach insulation plates to the ends of short bars to prevent electrical shock and separation.

Relay structure allows for easy checking and replacement

The relays themselves are designed to the finest detail for ease of use, allowing for easy operation checks and replacement.

Ratings

Coil ratings

Rated input voltage	Rated current			Must operate voltage	Must release voltage	Power consumption		Maximum allowable voltage
	AC		DC	Percentage of the rated voltage		AC (VA)	DC (mW)	Percentage of the rated voltage
	50 Hz	60 Hz	DC	Percentage of the rated voltage		AC (VA)	DC (mW)	Percentage of the rated voltage
12 VDC	-	-	27.9 mA	80% max.*	10% min.	-	Approx. 300 mW	110%
24 VDC	-	-	13.5 mA			-	Approx. 300 mW
24 VAC/VDC	13.7 mA	14.9 mA	12.6 mA			Approx. 0.4 VA	Approx. 300 mW
48 VAC/VDC	5.9 mA	6.4 mA	5.4 mA			Approx. 0.3 VA	Approx. 250 mW
100 VAC	6.8 mA	7.1 mA	-			Approx. 0.7 VA	-
110 VAC	6.1 mA	6.4 mA	-			Approx. 0.7 VA	-
200 VAC	6.1 mA	7.3 mA	-			Approx. 1.5 VA	-
230 VAC	6.8 mA	8.2 mA	-			Approx. 1.9 VA	-

Note: The operating characteristics are measured at ambient temperature of 23°C.
* Operating voltage will be, for mounting in the upside down direction, 85% max.
(Upside down: Direction in which the mechanical indicator faces down)

Contact ratings

Item	Standard (G2RV-ST700, 500, 701, 501)		For microloads (G2RV-ST700-AP, 500-AP) *2
Contact configuration	SPDT
Load	Resistive load (cosφ=1)	Inductive load (cosφ=0.4, L/R=7ms)	Resistive load (cosφ=1)
Rated load	6 A at 250 VAC 6 A at 30 VDC	2.5 A at 250 VAC 2 A at 30 VDC	50 mA at 30 VAC 50 mA at 36 VDC
*Rated carry current 3**	6 A		50 mA
Maximum switching voltage	440 VAC, 125 VDC		30 VAC, 36 VDC
Maximum switching current	6 A		50 mA
Maximum switching power	1,500 VA 180 W	500 VA 60 W	-
Failure rate P value (reference value) *1	10 mA at 5 VDC		1 mA at 100 mVDC

*1. P level: λ₆₀=0.1×10^-6/times
　　This value is the value in switching frequency 120 operations/min.
*2. If the Au plating layer is destroyed, the number will be the same as the standard type.
*3. Please energize under 32A total when use short bar connection.

Characteristics

Item		Standard (G2RV-ST700, 500, 701, 501)	For microloads (G2RV-ST700-AP, 500-AP)
Contact resistance *		100 mΩ max.
Operate time *		20 ms max.
Release time *		AC, AC/DC: 40 ms max. DC: 20 ms max.
Maximum operating frequency		Mechanical: 18,000 operations/h Electrical: 1,800 operations/h (rated load)
Insulation resistance		1,000 MΩ min. (at 500 VDC)
Dielectric strength		Between coil and contacts: 4,000VAC 50/60 Hz 1 min Contact between the same polarity: 1,000 VAC 50/60 Hz 1 min
Vibration resistance		Destruction: 10 to 55 to 10 Hz, single amplitude 0.50 mm (double amplitude 1.0 mm) Malfunction: 10 to 55 to 10 Hz, single amplitude 0.50 mm (double amplitude 1.0 mm)
Shock resistance		Destruction: 1,000 m/s² Malfunction: Energized 200m/s², Non-energized 100m/s²
Endurance *	Mechanical	5,000,000 operations min.
Endurance *	Electrical	NO contact: 70,000 operations min. NC contact: 50,000 operations min.	5,000,000 operations min.
Ambient operating temperature		Operating: -40 to +55°C (with no icing or condensation)
Ambient operating humidity		Operating: 5 to 85% RH
Weight		Approx. 30 g
Type of interruption		Micro-disconnection
Type of insulation		Basic isolation: Coil-Contact, Live parts-Ground
Pollution degree		2
Impulse withstand voltage		4.0 kV
Test procedure		A (Group mounting)
Categories of environmental protection		RT 1
Degree of protection by enclosure according to IEC 60529		IP20
Contact material		Ag alloy	Ag alloy + Au plating

Note: Above values are initial values.
* Value is at ambient temperature of 23°C.

Approved standards

UL (File No.E41643)

Model	Contact form	Operation coil ratings	Contact ratings	Operations
G2RV-ST series	SPDT	12 to 48 VDC 24 to 230 VAC	6 A at 250 VAC (Resistive load) 6 A at 30 VDC (Resistive load) 2 A at 400 VAC (Resistive load)*	6,000

* If the load voltage exceeds 250 VAC, please attach with a spacing of 12 mm min., or use a separate plate (XW5Z-EP12) or 4psc of isolation plate (P2RV-P3.1T).

TÜV (File No.R50327609, EN 61810-1)

Model	Contact form	Operation coil ratings	Contact ratings	Operations
G2RV-ST series	SPDT	12, 24 VDC 24, 48 VAC/VDC 100, 110, 200, 230 VAC	6 A at 250 VAC (Resistive load) 6 A at 30 VDC (Resistive load) 2 A at 400 VAC (Resistive load)*	50,000 50,000 6,000

* If the load voltage exceeds 250 VAC, please attach with a spacing of 12 mm min., or use a separate plate (XW5Z-EP12) or 4psc of isolation plate (P2RV-P3.1T).

PLC interface unit

Ratings / characteristices

Rated voltage		30 VAC/DC
Rated current		0.5 A/poles, 2 A/unit
Ambient operating temperature		-40 to 55°C
Vibration resistance	Destruction	10 to 55 to 10 Hz, single amplitude 0.50 mm (double amplitude 1.0 mm)
Vibration resistance	Malfunction	10 to 55 to 10 Hz, single amplitude 0.50 mm (double amplitude 1.0 mm)
Shock resistance	Destruction	300 m/s²
Shock resistance	Malfunction	100 m/s²

(Unit: mm)

Slim I/O Relay + socket

Push-In Plus Terminal Block

Models without latching lever (without test switch)
G2RV-ST500
G2RV-ST500-AP

Note: For recommended ferrules, crimp tools, and types and gauges of wires, refer to 3. Recommended Ferrules and Crimp Tools on Data Sheet.

Models with latching lever (with test switch)
G2RV-ST501

Note: For recommended ferrules, crimp tools, and types and gauges of wires, refer to 3. Recommended Ferrules and Crimp Tools on Data Sheet.

Screw terminal

Models without latching lever (without test switch)
G2RV-ST700
G2RV-ST700-AP

Note: For recommended ferrules, crimp tools, and types and gauges of wires, refer to 3. Recommended Ferrules and Crimp Tools on Data Sheet.

Models with latching lever (with test switch)
G2RV-ST701

Note: For recommended ferrules, crimp tools, and types and gauges of wires, refer to 3. Recommended Ferrules and Crimp Tools on Data Sheet.

Relay for maintenance

Models without latching lever
G2RV-1-S-G
G2RV-1-S-AP-G

Models with latching lever (test switch)
G2RV-1-SI-G

PLC interface unit

Push-IN
P2RVC-8ST-I-5(-1)
P2RVC-8ST-O-5(-1)

Screw
P2RVC-8ST-I-7-1
P2RVC-8ST-O-7-1

Accessories (order separately)

Short Bars

PYDN-6.2ST-200[]

Separate Plate

XW5Z-EP12

Isolation plate

P2RV-P3.1ST

Parts for DIN Track Mounting

Refer to your OMRON website for details on the PFP-[].

TITLE	DOCUMENT TYPE	SIZE
G2RV-ST / G3RV-ST Series Catalog	Catalog	3740 KB
Value Design for Panel Catalog	Catalog	6140 KB
G2RV-ST / G3RV-ST DataSheet	Datasheet	1710 KB