Omron, G2RV Series

• Lockable test switch models now available.

• Large plug-in terminals for reliable connection.

• LED indicator and mechanical flag for status indication.

• Input type with gold plated contacts available.

• Transparent housing allows inspection of contact condition.

• Slim width to save space.

• Push-in terminals and accessories for easy wiring.

• Lloyd’s approval

Rated voltage	*Rated current 1**			Must operate voltage	Must release voltage	Power consumption		Input voltage
	AC		DC	% of rated voltage		AC (VA) Approx.	DC (mW) Approx.	% of rated voltage
	50 Hz	60 Hz	DC	% of rated voltage		AC (VA) Approx.	DC (mW) Approx.	% of rated voltage
12 VDC	---	---	27.2 mA	0.8	0.1	---	300 mW	±10%
24 VDC	---	---	13.3 mA			---	300 mW
24 VAC/DC	21.1 mA	22.5 mA	13.0 mA			0.5 VA	300 mW
48 VAC/DC	8.5 mA	9.0 mA	5.2 mA			0.4 VA	250 mW
110 VAC	7.1 mA	7.5 mA	---			0.8 VA	---
230 VAC	7.3 mA	7.9 mA	---			1.7 VA	---

*1. Rated currents are measured at 23 degrees Celsius (ambient)

Item	Standard type (G2RV-SL700, 500, 701, 501)		*Input type (G2RV-SL700-AP, 500-AP) 2**
Number of poles	1 pole
Load	Resistive load (cosφ = 1)	Inductive load (cosφ = 0.4, L/R = 7 ms)	Resistive load (cosφ = 1)
Rated load	6 A at 250 VAC; 6 A at 30 VDC	2.5 A at 250 VAC; 2 A at 30 VDC	50 mA at 30 VAC; 50 mA at 36 VDC
Rated carry current	6 A		50 mA
Max. switching voltage	400 VAC, 125 VDC		30 VAC, 36 VDC
Max. switching current	6 A		50 mA
Max. switching power	1,500 VA 180 W	500 VA 60 W	——
Failure rate (reference value) *1	10 mA at 5 VDC (P level)		1 mA at 100 mVDC (P level)

*1. P level: λ₆₀ = 0.1 × 10^-6/operation
*2. If a gold layer is destroyed, contact ratings of standard type are applicable.

Item	Standard type (G2RV-SL700, 500, 701, 501)	Input type (G2RV-SL700-AP, 500-AP)
Contact resistance	100 mΩ max.
Operate (set) time	20 ms max.
Release time	40 ms max.
Max. operating frequency	Mechanical: 18,000 operations/hr Electrical: 1,800 operations/hr (under rated load)
Insulation resistance	1,000 MΩ min. (at 500 VDC)
Dielectric strength	4,000 VAC, 50/60 Hz for 1 min between coil and contacts*; 1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity
Vibration resistance	Destruction: 10 to 55 to 10 Hz, 0.50 mm single amplitude (1.0 mm double amplitude) Malfunction: 10 to 55 to 10 Hz, 0.50 mm single amplitude (1.0 mm double amplitude)
Shock resistance	Destruction: 1,000 m/s² Malfunction: 200 m/s² when energized; 100 m/s² when not energized
Endurance	Mechanical: 5,000,000 operations min. Electrical: 100,000 Typical; NO 70,000 operations min.; NC 50,000 operations min.	Mechanical: 5,000,000 operations min. Electrical: 5,000,000 operations min.
Ambient temperature	Operating: -40°C to 55°C (with no icing or condensation)
Ambient humidity	Operating: 5% to 85%
Weight	Approx. 35 g
Overvoltage category	III
Pollution degree	2
Contact material	AgSnIn	AgSnIn + Gold Plating
Creepage distance	7.0 mm
Clearance distance	5.5 mm

Note: Values in the above table are the initial values.

Model	Contact form	Coil ratings	Contact ratings	Operations
G2RV-SL Series	SPDT	12 to 48 VDC 24 to 230 VAC	250 VAC 6 A (Resistive Load) 30 VDC 6 A (Resistive Load) 400 VAC 2 A (Resistive Load)	6,000

Contact form	Coil ratings	Contact ratings	Operations
SPDT	12, 24 VDC 24, 48 VAC/DC 110, 230 VAC	250 VAC 6 A (Resistive Load) 30 VDC 6 A (Resistive Load) 400 VAC 2 A (Resistive Load)	50,000 50,000 6,000

Model	Contact form	Coil ratings	Contact ratings
G2RV-SL Series	SPDT	12, 24 VDC 24, 48 VAC/DC 110, 230 VAC	250 VAC 6 A (Resistive load) 250 VAC 2.5 A (PF0.4) 30 VDC 6 A (Resistive load) 30 VDC 2 A (L/R=7ms)

Input	Rated voltage	30 VAC/VDC max.
	Current capacity	0.5 A per channel
	Current capacity	2.0 A total current, power supply terminal
Characteristics	Ambient temperature	Operating: 0 to 55°C Storage: -20 to 85°C
	Overvoltage category	III
	Pollution degree	2

Input	Rated voltage	30 VAC/VDC max.
	Current capacity	0.5 A per channel
	Current capacity	2.0 A total current, power supply terminal
Characteristics	Ambient temperature	Operating: 0 to 55°C Storage: -20 to 85°C
	Overvoltage category	III
	Pollution degree	2

Control line	AWG28/0.08 mm², tin-plated copper
Diameter cable	10.7 mm (one end splits into 4 sections: A, B, C, D)
Operating voltage	60 VDC
Continuous current per signal wire	0.5 A
Max. total current, 4 bytes, each	1.0 A
Test voltage	0.5 KV, 50 Hz, 1 min
Operating temperature range	-20°C to +50°C

Control line	AWG26/0.14 mm², tin-plated copper
Diameter cable	7.6 mm
Operating voltage	60 VDC
Continuous current per signal wire	0.5 A
Max. total current	1.0 A
Test voltage	0.5 KV, 50 Hz, 1 min
Operating temperature range	-20°C to +50°C

Max current (EN60947-7-1 section 8.3.3/1991)	32 A
Max. Voltage	400 VAC
Max. Voltage when cutting Cross-bar without using separation plate or end-bracket	250 VAC

G2RV-SL700
G2RV-SL700-AP

G2RV-SL701

G2RV-SL500
G2RV-SL500-AP

G2RV-SL501

G2RV-1-S
G2RV-1-S-AP

G2RV-1-SI

TITLE	DOCUMENT TYPE	SIZE
G2RV	Catalog	3081 KB
G2RV/G3RV Series	Catalog	14234 KB
Relay Defects Causes & Solutions (General-purpose Relay Edition)	Technical Guide	4100 KB