Two levels of configuration for easy operation of essential functions
The "RUN mode" is for setting the threshold value, the zero point adjustment and key lock/release setting, and the "detailed configuration" allows the basic settings of sensor operation. The two-level configuration enables an easy and immediate use of the product.
Main menu for detailed configuration
|
|
|
|
Refer to Three output modes for details of operation setting mode.
Black body for enhanced visibility of LCD display
The unit body is completely black to make the LCD display easier to see.
Firm and crisp clicking feel
The buttons offer firm and crisp clicking feel for smooth and reliable setting operations.
|
|
Extra-short depth and light weight
The unit body measures only 24.9 mm 0.980 in in depth to allow installation in a narrow space. The main unit weighs only about 25 g. The lightweight unit means minimal load when mounted on a moving part such as a robot arm.
Two types to choose from depending on your application
The low pressure type can be used with positive or negative pressure, while the high pressure type is
suitable for positive pressure of up to 1 MPa.
|
|
|
|
Supports tight installation
Space savings can also be achieved even when an L-shaped mounting bracket is used.
|
|
Sensor
Sensor mounting bracket (Optional)
|
|
Sensor mounting bracket (Optional)
|
|
|
|
Panel mounting bracket (Optional), Front protection cover (Optional)
|
|
|
|
Connector attached cable (Optional, CN-14A-C2 is attached to the sensor)