Omron, A22R/ M22R Series

Responds with high grade
illumination to various needs

1. Shining Metal Ring

Provides shining and robust metal ring.

2. Soft to the touch

Gentle design for human.

3. Additional unit type

Switch unit can be added.

4. Compact size

The body length under a panel decreased by 15% compare with our former products.

Approved standards

Switch unit

UL, cUL	UL 508/CSA C22.2 No.14 File No. E76675 6A 240VAC/10A 120VAC
EN	EN60947-5-1 (low voltage directive) 3A 240VAC (AC-15)
CCC	GB/14048.5-2001 3A 240VAC/1.5A 24VDC

Lamp unit

UL, cUL	UL 508/CSA C22.2 No.14 File No. E76675 24VAC/DC MAX

Voltage-reduction unit

UL, cUL	UL 508/CSA C22.2 No.14 File No. E76675 220VAC
CCC	GB/14048.5-2001 220VAC

Indicator

UL, cUL	UL 508/CSA C22.2 No.14 File No. E76675 12A: 12VAC/DC 24A: 24VAC/DC T2: 220VAC
CCC	GB/14048.5-2001 T2: 220VAC

Ratings

Contacts

Rated current (A)	Rated voltage (V)	Inductive load
Rated current (A)	Rated voltage (V)	Rated current (A)	Power facfor
10	240	3	0.4

Rated current values are determined according to the testing conditions. The above ratings were obtained by conducting tests under the following conditions:
Ambient temperature: 20+/- 2ºC
Ambient humidity: 65+/-5%RH
Operating frequency: 30 operations/minute

LED (For pushbutton unit)

Operating voltage	Current consumption
AC/DC 6V±5%	20mA
AC/DC 12V±5%	20mA
AC/DC 24V±5%	20mA

LED (For indicator unit)

Operating voltage	Current consumption
AC/DC 12V±5%	20mA
AC/DC 24V±5%	20mA

Voltage reduction unit (For pushbutton and indicator units)

Operating voltage	Current consumption
AC 200V(190 to 230V)	20mA

Characteristics

Environment

*Ambient temperature1**	Non-lighted type: -20 to +60ºC Lighted type: -20 to +50ºC
Ambient humidity	-35 to 85%RH
*Storage temperature1**	-40 to +70ºC
*Protective code2**	IP65
Vibration resistance	10 to 55Hz, Double amplitude 1.5mm
Shock resistance	Non-lighted type: 1,000m/s² Lighted type: 600m/s²

*1: With no icing or condensation
*2: Protection against dust or water from the front of a mounting panel side

Operation

Operation		Slow action
Operating frequency	Mechanical	Momentary operation: 60 operations/minute max.
Operating frequency	Electrical	Knob-type and Key-type selector: 30 operations/minute max.
Mechanical durability		Momentary switch:3,000,000 operations Alternate, Key/Knob Selector switches: 300,000 operations

Electrical Characteristics (Switch block)

Insulation resistance	100MΩ Minimum (At 500VDC)
Dielectric strength	Between terminals of same polarity: AC2,500V 50/60Hz for 1 minute Between terminals of different polarity: AC2,500V 50/60Hz for 1 minute
Rating	AC-15, A600, Ue=240V, Ie=3A
Rated insulation voltage	Ui=600V, Pollution degree: 3
Conditional short-circuit current	10A, IEC60209-1
Electrical durability	500,000 operations Minimum (at AC 240V, 3A, cosø=0.4)

Characteristics

Operating character istics

Pushbutton switch (1a1b)

Total Travel Force (TTF)	29.4N Maximum
Total Travel (TT)	5.5mm Maximum

Knob-type selector switch (1a1b)

Total Travel Force (TTF)	Manual reset: 0.34N·m Maximum * Auto-reset 2-notch: 0.25N·m * 3-notch: 0.34N·m *
Total Travel (TT)	2-notch: approx. 90 degree (3-notch: approx.45 degree)
Releasing Force (RF)	Manual reset: 0.34N·m Maximum *

* Rotation torque for knob type/key type selector switches.

Key-type selector switch (1a1b)

Total Travel Force (TTF)	Manual reset: 0.34N·m Maximum * Auto-reset 2-notch: 0.25N·m * 3-notch: 0.34N·m *
Total Travel (TT)	2-notch: approx. 90 degree (3-notch: approx.45 degree)
Releasing Force (RF)	Manual reset: 0.34N·m Maximum *